NCV1009D(2004) Ver la hoja de datos (PDF) - ON Semiconductor
Número de pieza
componentes Descripción
Fabricante
NCV1009D Datasheet PDF : 6 Pages
| |||
NCV1009
2.5 Volt Reference
The NCV1009 is a precision trimmed 2.5 V ±5.0 mV shunt
regulator diode. The low dynamic impedance and wide operating
current range enhances its versatility. The tight reference tolerance is
achieved by on−chip trimming which minimizes voltage tolerance and
temperature drift.
A third terminal allows the reference voltage to be adjusted ±5.0%
to calibrate out system errors. In many applications, the NCV1009Z
can be used as a pin−to−pin replacement of the LT1009CZ and the
LM136Z−2.5 with the external trim network eliminated.
Features
• 0.2% Initial Tolerance Max.
• Guaranteed Temperature Stability
• Maximum 0.6 Ω Dynamic Impedance
• Wide Operating Current Range
• Directly Interchangeable with LT1009 and LM136 for Improved
Performance
• No Adjustments Needed for Minimum Temperature Coefficient
• Meets Mil Std 883C ESD Requirements
• Extended Operating Temperature Range for Use in Automotive
Applications
• NCV Prefix, for Automotive and Other Applications Requiring Site
and Change Control
5.0 V−35 V
VREF
3.6 kΩ
ADJ
GND
10 kΩ∗
TRIM
http://onsemi.com
8
1
SO−8
D SUFFIX
CASE 751
PIN CONNECTIONS AND
MARKING DIAGRAM
1
NC
NC
NC
GND
8
NC
NC
VREF
ADJ. PIN
A
= Assembly Location
Y
= Year
WW = Work Week
ORDERING INFORMATION
Device
Package
Shipping†
NCV1009D
SO−8
95 Units/Rail
NCV1009DR2
SO−8 2500 Tape & Reel
†For information on tape and reel specifications,
including part orientation and tape sizes, please
refer to our Tape and Reel Packaging Specification
Brochure, BRD8011/D.
*±5.0% Trim Range
If the external trim resistor is not used, the “ADJ. PIN” should
be left floating. The 10k trim potentiometer does not effect the
temperature coefficient of the device.
Figure 1. Application Diagram
© Semiconductor Components Industries, LLC, 2004
1
August, 2004 − Rev. 6
Publication Order Number:
NCV1009/D
Share Link: 