MBR1060 Ver la hoja de datos (PDF) - Silicon Standard Corp.
Número de pieza
componentes Descripción
Fabricante
MBR1060 Datasheet PDF : 3 Pages
| |||
MBR10XX SERIES
Mounting Pad Layout TO-263AB
TO-263AB(D2PAK)
Dimensions in inches and (millimeters)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
(TC=25oC unless otherwise noted)
Parameter
Symbol MBR1035 MBR1045 MBR1050 MBR1060
Maximum repetitive peak reverse voltage
Working peak reverse voltage
Maximum DC blocking voltage
Maximum average forward rectified current (See Fig. 1)
Peak repetitive forward current (sq. wave, 20KHz)
at TC=135oC
Peak forward surge current 8.3ms single half sine-wave
superimposed on rated load (JEDEC Method)
Peak repetitive reverse current at tp = 2.0us, 1KHz
Voltage rate of change (rated V )
R
Maximum instantaneous forward voltage (Note 4)
Maximum instantaneous
reverse current at rated DC
blocking voltage (Note 4)
at IF=10A, TC=25oC
at IF=10A, TC=125oC
at IF=20A, TC=25oC
at IF=20A, TC=125oC
TC=25oC
TC=125oC
Maximum thermal resistance from junction to case
RMS Isolation voltage (MBRF type only) from terminals
to heatsink with t = 1.0 second, RH < 30%
Operating junction temperature range
Storage temperature range
VRRM
VRWM
VDC
IF(AV)
IFRM
IFSM
IRRM
dv/dt
VF
IR
RθJC
VISOL
T
J
TSTG
35
45
50
60
35
45
50
60
35
45
50
60
10
20
150
1.0
0.5
10,000
-
0.80
0.57
0.70
0.84
0.95
0.72
0.85
0.10
15
MBR 2.0 / MBRF 4.0 / MBRB 2.0
4500 (Note 1)
3500 (Note 2)
1500 (Note 3)
-55 to +150
-55 to +150
Notes:
1. Clip mounting (on case), where lead does not overlap heatsink with 0.110" offset
2. Clip mounting (on case), where leads do overlap heatsink
3. Screw mounting with 4-40 screw, where washer diameter is < 4.9 mm (0.19")
4. Pulse test: 300us pulse width, 1% duty cycle
Unit
Volts
Volts
Volts
Amps
Amps
Amps
Amps
V/us
Volts
mA
oC/W
Volts
oC
oC
07/28/2007 Rev.1.00
www.SiliconStandard.com
2
Share Link: 