MA0S506AJ Ver la hoja de datos (PDF) - Tyco Electronics
Número de pieza
componentes Descripción
Fabricante
MA0S506AJ Datasheet PDF : 3 Pages
| |||
SPDT T/R Switch
5.0 - 6.0 GHz
MA0S506AJ
V2
Electrical Specifications: TA = 25°C, Z0 = 50 Ω 4
Parameter
Test Conditions
Unit
Min. Typ.
Insertion Loss
Isolation
Return Loss
TRISE, TFALL
TON, TOFF
1 dB Compression
Third Order Intercept
dB
—
1.4
dB
25
28
dB
—
9
10% to 90% RF, 90% to 10% RF
nS
—
10
50% Control to 90% RF, 50% Control to 10% RF
nS
—
25
V1/V2 = 0/3 V, VDD = 3 V
V1/V2 = 0/5 V, VDD = 5 V
dBm
—
32
dBm
—
35
dBm
—
44
4. Unless otherwise specified, input power is -10 dBm, VDD is +5 V, control voltages are 0/+5 V, and test frequency is 5.775 GHz
Max.
1.8
—
—
—
—
—
—
—
Switch Logic Table 5,6
Insertion Loss Path
Isolated Path
RF1/RFC
RF2/RFC
RF2/RFC
RF1/RFC
5. “0” = 0 +/- 0.2 volts
6. “1” = +2.7 to +5 volts, equal to VDD
V1
V2
1
0
0
1
Handling Procedures
Please observe the following precautions to avoid
damage:
Static Sensitivity
Gallium Arsenide Integrated Circuits are sensitive
to electrostatic discharge (ESD) and can be
damaged by static electricity. Proper ESD control
techniques should be used when handling these
devices.
Application Schematic
Board material: Rogers Duroid RO4350, 20 mil thick
dielectric (er=3.48). All RF traces are 50 ohms (43mils
wide).
2
M/A-COM Inc. and its affiliates reserve the right to make changes to the
product(s) or information contained herein without notice. M/A-COM makes
no warranty, representation or guarantee regarding the suitability of its
products for any particular purpose, nor does M/A-COM assume any liability
whatsoever arising out of the use or application of any product(s) or
information.
• North America Tel: 800.366.2266 / Fax: 978.366.2266
• Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300
• Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298
Visit www.macom.com for additional data sheets and product information.
Share Link: 