HMC409LP4(V03) Ver la hoja de datos (PDF) - Hittite Microwave
Número de pieza
componentes Descripción
Fabricante
HMC409LP4 Datasheet PDF : 8 Pages
| |||
v03.0710
Evaluation PCB
HMC409LP4 / 409LP4E
GaAs InGaP HBT 1 WATT
POWER AMPLIFIER, 3.3 - 3.8 GHz
9
List of Materials for Evaluation PCB 108355 [1]
Item
J1 - J2
J3, J4
C1 - C5
C6 - C7
C8
C9
C10
C11
L1, L2
Description
PCB Mount SMA RF Connector
2 mm DC Header
100 pF Capacitor, 0402 Pkg.
1000 pF Capacitor, 0603 Pkg.
10 pF Capacitor, 0402 Pkg.
0.5 pF Capacitor, 0603 Pkg.
1.6 pF Capacitor, 0603 Pkg.
4.7 µF, Tantalum
3.9 nH Inductor, 0603 Pkg.
The circuit board used in the application should
use RF circuit design techniques. Signal lines
should have 50 Ohm impedance while the package
ground leads and exposed paddle should be con-
nected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation board should be mounted to an
appropriate heat sink. The evaluation circuit board
shown is available from Hittite upon request.
L3
2.2 nH Inductor, 0402 Pkg. Toko
R1
56 Ohm Resistor, 0603 Pkg.
U1
HMC409LP4 / HMC409LP4E Amplifier
PCB [2]
108353 Eval Board
[1] Reference this number when ordering complete evaluation PCB
[2] Circuit Board Material: Rogers 4350, Er = 3.48
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
9-8
Share Link: 