HMC409LP4(V03) Ver la hoja de datos (PDF) - Hittite Microwave
Número de pieza
componentes Descripción
Fabricante
HMC409LP4 Datasheet PDF : 8 Pages
| |||
v03.0710
9
Absolute Maximum Ratings
Collector Bias Voltage (Vcc1, Vcc2)
Control Voltage (Vpd)
RF Input Power (RFIN)(Vs = Vpd = +5Vdc)
Junction Temperature
Continuous Pdiss (T = 85 °C)
(derate 57.5 mW/°C above 85 °C)
Thermal Resistance
(junction to ground paddle)
Storage Temperature
Operating Temperature
+5.5 Vdc
+5.5 Vdc
+10 dBm
150 °C
3.74 W
17.4 °C/W
-65 to +150 °C
-40 to +85 °C
Outline Drawing
HMC409LP4 / 409LP4E
GaAs InGaP HBT 1 WATT
POWER AMPLIFIER, 3.3 - 3.8 GHz
Typical Supply, Current vs. Supply
Voltage, Vcc1 = Vcc2 = Vpd
Vs (Vdc)
Icq (mA)
4.75
516
5.0
615
5.25
721
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
9-5
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE.
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Package Information
Part Number
Package Body Material
HMC409LP4
Low Stress Injection Molded Plastic
Lead Finish
Sn/Pb Solder
HMC409LP4E RoHS-compliant Low Stress Injection Molded Plastic
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
100% matte Sn
MSL Rating
MSL3 [1]
MSL3 [2]
Package Marking [3]
H409
XXXX
H409
XXXX
For price, delivery and to place orders: Hittite Microwave Corporation, 20 Alpha Road, Chelmsford, MA 01824
Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com
Application Support: Phone: 978-250-3343 or apps@hittite.com
Share Link: 