HGLM-1063 Ver la hoja de datos (PDF) - HP => Agilent Technologies

Número de pieza

componentes Descripción

Fabricante

HGLM-1063

Fibre Channel GBaud Optical Link Module

HP => Agilent Technologies 

deactivated their lasers, HGLM2

then activates its laser, sends a

signal to HGLM1 (which activates

its laser), which in turn sends a

confirming signal back to

HGLM2. This on-off-on handshake

confirms that the first syn-

chronous pulse came from

another HGLM-1063, or

equivalent module, with an OFC

safety system. Once this

sequence is complete, the link

between HGLM1 and HGLM2

returns to normal operation, with

both in the active mode. The on-

off-on timing is compatible with

the timing requirements of the

ANSI FC-PH specification for

Open Fibre Control timing of

100-M5-SL-I links. These timings

are defined as Decode 1, 2, and 3

and are given in the Timing

Specifications table later in this

document.

Laser Safety Compliance

The HGLM-1063 is designed and

certified as a Class 1 laser

product per 21 CFR (U.S. Code

of Federal Regulations),

Subchapter J. A Class 1 laser

product is safe for use and does

not pose a biological hazard if

used in accordance within the

data sheet limits and instructions.

CAUTION:

There are no user serviceable

parts nor any maintenance

required for the HGLM-1063.

All adjustments are made at

the factory before shipment to

our customers. Tampering

with, modifying or breaking

the preset trim pot seals will

result in voided product

warranty. It may also result in

improper operation of the

HGLM-1063 circuitry, and

possible overstress of the

laser source. Device degrada-

tion or product failure may

result.

Connection of the HGLM-1063

to a non-approved optical

source, operating above the

recommended absolute maxi-

mum conditions (especially

power supply) or operating

the HGLM-1063 in a manner

inconsistent with its design

and function may result in

hazardous radiation exposure

and may be considered an act

of modifying or manufacturing

a laser product. The person(s)

performing such an act is

required by law to recertify

and reidentify the laser

product under the provisions

of 21 CFR(Subchapter J).

Labeling

Each HGLM-1063 module is

labeled per 21 CFR

(Subchapter J), including the

actual date of manufacture

(Figure 4).

3.5

(0.138)

35.25

(1.388)

24.13

(0.950)

(05.1.097)(2X)

30.8

(1.213)

37.8

(1.488)

74.27 (2.924)

63.53 (2.501)

φ 2.5 PIN

(0.098)

BOTTOM VIEW

DIMENSIONS IN MILLIMETERS (INCHES).

Figure 5. HGLM-1063 Outline Drawing.

730

11.0 11.5

(0.433) (0.453)

1.25

(0.049)

28.35 (1.116)

27.0 (1.063)

4.8 (0.189)

RECEIVER

TRANSMITTER

2.0

(0.079)

25.4

(1.000)

28.0

(1.102)

30.0

(1.181)

2.5 mm DIAMOND PIN

φ 2.0 (2X)

(0.079)

Share Link: