AFBR-5803AZ Ver la hoja de datos (PDF) - HP => Agilent Technologies

Número de pieza

componentes Descripción

Fabricante

AFBR-5803AZ

FDDI, 100 Mb/s ATM, and Fast Ethernet Transceivers in Low Cost 1 x 9 Package Style

HP => Agilent Technologies 

12.0

0.51

11.1

0.75

42.0

9.53

(NOTE

1)

;;;;;;;;;;;;;;;;;;;;;;;;

24.8

12.09

;;;;;;;;;;;;

25.4

6.79 ;;;;;;;;;;;;;;;;;;;;;;;;

39.12

25.4

NOTE 1: MINIMUM DISTANCE FROM FRONT

OF CONNECTOR TO THE PANEL FACE.

;;;;;;;;;;;;;;;;;;;;;;;;

Figure 8a. Recommended Common Mechanical Layout for SC and ST 1 x 9 Connectored Transceivers.

Regulatory Compliance

These transceiver products are

intended to enable commercial

system designers to develop

equipment that complies with

the various international

regulations governing certifica-

tion of Information Technology

Equipment. See the Regulatory

Compliance Table for details.

Additional information is

available from your Agilent

sales representative.

Electrostatic Discharge (ESD)

There are two design cases in

which immunity to ESD

damage is important.

The first case is during

handling of the transceiver

prior to mounting it on the

circuit board. It is important

to use normal ESD handling

precautions for ESD sensitive

devices. These precautions

include using grounded wrist

straps, work benches, and

floor mats in ESD controlled

areas.

The second case to consider is

static discharges to the exterior

of the equipment chassis con-

taining the transceiver parts.

To the extent that the duplex

SC connector is exposed to the

outside of the equipment

chassis it may be subject to

whatever ESD system level test

criteria that the equipment is

intended to meet.

8

Share Link: