AFBR-5803AQZ Ver la hoja de datos (PDF) - Avago Technologies

Número de pieza

componentes Descripción

Fabricante

AFBR-5803AQZ

FDDI, 100 Mb/s ATM, and Fast Ethernet Transceivers in Low Cost 1 x 9 Package Style

Avago Technologies 

AFBR-5803AQZ and AFBR-5803ATQZ

FDDI, 100 Mb/s ATM, and Fast Ethernet Transceivers

in Low Cost 1 x 9 Package Style

Data Sheet

Description

The AFBR-5800Z family of trans­ceivers from Avago Tech-

nologies provide the system designer with products

to implement a range of Fast Ethernet, FDDI and ATM

(Asynchronous Transfer Mode) designs at the 100 Mb/s-

125 MBd rate.

The transceivers are all supplied in the industry standard

1 x 9 SIP package style with either a duplex SC or a duplex

ST* connector interface.

FDDI PMD, ATM and Fast Ethernet 2 km Backbone Links

The AFBR-5803AQZ/ATQZ are 1300 nm products with

optical performance compliant with the FDDI PMD

standard. The FDDI PMD standard is ISO/IEC 9314‑3: 1990

and ANSI X3.166 - 1990.

These transceivers for 2 km multimode fiber backbones

are supplied in the small 1 x 9 duplex SC or ST package

style.

The AFBR-5803AQZ/ATQZ is useful for both ATM 100

Mb/s interfaces and Fast Ethernet 100 Base-FX inter-

faces. The ATM Forum User-Network Interface (UNI)

Standard, Version 3.0, defines the Physical Layer for 100

Mb/s Multimode Fiber Interface for ATM in Section 2.3 to

be the FDDI PMD Standard. Likewise, the Fast Ethernet

Alliance defines the Physical Layer for 100 Base-FX for

Fast Ethernet to be the FDDI PMD Standard.

ATM applications for physical layers other than 100 Mb/s

Multimode Fiber Interface are supported by Avago Tech-

nologies. Products are available for both the single mode

and the multi­mode fiber SONET OC-3c (STS‑3c) ATM in-

terfaces and the 155 Mb/s-194 MBd multi­mode fiber ATM

interface as specified in the ATM Forum UNI.

Contact your Avago Technologies sales representative

for infor­ma­tion on these alternative Fast Ethernet, FDDI

and ATM products.

Features

• Full compliance with the optical performance re-

quirements of the FDDI PMD standard

• Full compliance with the FDDI LCF-PMD standard

• Full compliance with the optical performance re-

quirements of the ATM 100 Mb/s physical layer

• Full compliance with the optical performance re-

quirements of 100 Base‑FX version of IEEE 802.3u

• Multisourced 1 x 9 package style with choice of

duplex SC or duplex ST* receptacle

• Wave solder and aqueous wash process compatible

• Single +3.3 V or +5 V power supply

• RoHS Compliance

• Industrial range -40 to 85C

Applications

• Multimode fiber backbone links

• Multimode fiber wiring closet to desktop links

• Very low cost multimode fiber links from wiring

closet to desktop

• Multimode fiber media converters

*ST is a registered trademark of AT&T Lightguide Cable Connectors.

Share Link: