AD8016ARP Ver la hoja de datos (PDF) - Analog Devices
Número de pieza
componentes Descripción
Fabricante
AD8016ARP Datasheet PDF : 20 Pages
| |||
AD8016
ABSOLUTE MAXIMUM RATINGS1
Supply Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26.4 V
Internal Power Dissipation
PSOP3 Package2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2 W
SO-Batwing Package3 . . . . . . . . . . . . . . . . . . . . . . . . . 1.4 W
TSSOP-EP Package4 . . . . . . . . . . . . . . . . . . . . . . . . 1.4 W
Input Voltage (Common-Mode) . . . . . . . . . . . . . . . . . . . . ± VS
Differential Input Voltage . . . . . . . . . . . . . . . . . . . . . . . . . ± VS
Output Short-Circuit Duration
. . . . . . . . . . . . . . . . . . . . Observe Power Derating Curves
Storage Temperature Range . . . . . . . . . . . . . –65°C to +125°C
Operating Temperature Range . . . . . . . . . . . . –40°C to +85°C
Lead Temperature Range (Soldering 10 sec) . . . . . . . . . 300°C
NOTES
1Stresses above those listed under Absolute Maximum Ratings may cause perma-
nent damage to the device. This is a stress rating only; functional operation of the
device at these or any other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute maximum rating
conditions for extended periods may affect device reliability.
2Specification is for device on a 4-layer board with 10 inches 2 of 1 oz. copper at 85°C
20-lead PSOP3 package: θJA = 18°C/W.
3Specification is for device on a 4-layer board with 10 inches 2 of 1 oz. copper at 85°C
24-lead Batwing package: θJA = 28°C/W.
4Specification is for device on a 4-layer board with 9 inches2 of 1 oz. copper at 85°C
28-lead (TSSOP-EP) package: θJA = 29°C/W.
MAXIMUM POWER DISSIPATION
The maximum power that can be safely dissipated by the AD8016
is limited by the associated rise in junction temperature. The
maximum safe junction temperature for plastic encapsulated
device is determined by the glass transition temperature of the
plastic, approximately 150°C. Temporarily exceeding this limit
may cause a shift in parametric performance due to a change in
the stresses exerted on the die by the package.
The output stage of the AD8016 is designed for maximum load
current capability. As a result, shorting the output to common
can cause the AD8016 to source or sink 2000 mA. To ensure
proper operation, it is necessary to observe the maximum power
derating curves. Direct connection of the output to either power
supply rail can destroy the device.
8
7
6
PSOP3
5
4
SO-BATWING
3
TSSOP-EP
2
1
0
0 10 20 30 40 50 60 70 80 90
AMBIENT TEMPERATURE (؇C)
Figure 2. Maximum Power Dissipation vs.
Temperature for AD8016 for TJ = 125°C
Model
AD8016ARP
AD8016ARP-REEL
AD8016ARP-EVAL
AD8016ARB
AD8016ARB-REEL
AD8016ARB-EVAL
AD8016ARE
AD8016ARE-REEL
AD8016ARE-REEL7
AD8016ARE-EVAL
ORDERING GUIDE
Temperature
Range
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
–40°C to +85°C
Package
Description
20-Lead PSOP3
20-Lead PSOP3
Evaluation Board
24-Lead SO-Batwing
24-Lead SO-Batwing
Evaluation Board
28-Lead TSSOP-EP
28-Lead TSSOP-EP
28-Lead TSSOP-EP
Evaluation Board
Package
Option
RP-20A
RP-20A
RB-24
RB-24
RE-28-1
RE-28-1
RE-28-1
CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily
accumulate on the human body and test equipment and can discharge without detection.
Although the AD8016 features proprietary ESD protection circuitry, permanent damage may
occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD
precautions are recommended to avoid performance degradation or loss of functionality.
–4–
REV. B
Share Link: 