Dual, Serial-Input,
Voltage-Output, 12-Bit MDAC
____________________________Typical Operating Characteristics (continued)
(VDD = 15V, VSS = -15V, RL = 2kΩ, CL = 100pF, unless otherwise noted.)
SMALL-SIGNAL PULSE RESPONSE
LARGE-SIGNAL PULSE RESPONSE
AGNDA
A
AGNDA
A
A = VOUTA, 50mV/div
TIMEBASE = 2µs/div
VREFA = ±100mV SQUARE WAVE
A = VOUTA, 5V/div
TIMEBASE = 2µs/div
VREFA = ±10V SQUARE WAVE
______________________________________________________________Pin Description
PIN
NAME
FUNCTION
1
RFBA
Feedback Resistor for DACA
2
VREFA
Reference Input for DACA
3
VOUTA
Voltage Output for DACA
4
AGNDA
Analog Ground for DACA
5
AGNDB
Analog Ground for DACB
6
VOUTB
Voltage Output for DACB
7
VREFB
Reference Input for DACB
8
RFBB
Feedback Resistor for DACB
9
VSS
Negative Supply Voltage
10
DGND
Digital Ground
11
SCLK
Serial Clock Input
Serial Data Output. Open-drain N-channel MOSFET output: requires external pull-up resis-
12
DOUT
tor. Data on DOUT changes on the falling edge of SCLK. Serial output data is delayed 24
clock cycles from DIN.
13
DIN
Serial Data Input. CMOS- and TTL-compatible input. Data is clocked into DIN on the rising
edge of SCLK. CS must be low for data to be clocked in.
14
CS
Chip-Select Input, active low. Data is shifted in and out when CS is low. DAC latches are
updated when CS is high and LDAC is low.
15
LDAC
Asynchronous Load DAC Input, active low. DAC latches are updated when CS is high and
LDAC is low.
16
VDD
Positive Supply Voltage
6 _______________________________________________________________________________________