HMC199MS8 Ver la hoja de datos (PDF) - Hittite Microwave

Número de pieza

componentes Descripción

Fabricante

HMC199MS8

DUAL SPDT SWITCH DC - 2.5 GHz

Hittite Microwave 

v04.0404

Typical Application Circuit

8

HMC199MS8 / 199MS8E

DUAL SPDT SWITCH

DC - 2.5 GHz

Notes:

1. Set A/B control to 0/+5V, Vdd = +5V and use HCT series logic to provide a TTL driver interface.

2. Control inputs A/B can be driven directly with CMOS logic (HC) with Vdd = 5 to 7 Volts applied to the CMOS logic gates.

3. DC Blocking capacitors are required for each RF port as shown. Capacitor value determines lowest frequency of operation.

4. Highest RF signal power capability is achieved with Vdd = +7V and A/B set to 0/+7V.

5. For further information refer to “Using the HMC199MS8 as a Low-Cost 1-Bit Attenuator” product note.

8 - 34

For price, delivery, and to place orders, please contact Hittite Microwave Corporation:

20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373

Order On-line at www.hittite.com

Share Link: