CL1F3201 Ver la hoja de datos (PDF) - Unspecified

Número de pieza

componentes Descripción

Fabricante

CL1F3201

Clipper Industrial Plastic Connectors

Unspecified 

Clipper Industrial Plastic Connectors

Locked

plate

Unlocked

plate

Locked, the retention plate holds the contacts firmly in position

Unlocked, the retention plate allows

the insertion/extraction of contacts without tooling

Description

Retention plate principle

Features

Mechanical

• Monobloc shell and insulator in

thermoplastic material self-extinguishing to

UL 94 V0.

• 180° screw coupling with positive audible

safety latch.

• Scoop proof.

• Copper alloy contacts, machined or stamped

and formed

• plating : gold on active

part over nickel.

• Mechanical endurance :

- connector : 250 cycles mating / unmating,

- retention plate : 50 cycles mating /

unmating.

• Retention force :

- # 20 → 70 N

- # 16 → 90 N.

• Vibration :

- frequency range :

10-2000 Hz, 20 g

- 10 cycles in accordance with CEI 68-2-6

Electrical

• Withstand voltage : 1500 Vrms min or in

accordance with DIN 57110b.

• Contact resistance < 10 mW.

• Current rating per contact :

- machined contacts :

# 20 (7 Amps), # 16 (13 Amps)

- stamped and formed contacts :

# 20 (5 Amps), # 16 (10 Amps).

Environmental

• Sealing :

- up to IP68

• Working temperature :

-40°C to +125°C. (-40°F to +257°F)

• Resistance to salt spray :

- 48 h min

- > 1000 h (sealed mated connectors).

• Resistance to fluids :

- oil,

- petrol, fuel,

- lubricants

- other fluids : consult us.

Presentation

CLIPPER is a plastic low cost range of

industrial connectors, UL & CSA approved.

Complementing SOURIAU product range

CLIPPER offers :

• a high sealing level :

- IP67 for the sealed plug (with o’ring

and mating seal)

- IP68 for the enhanced sealed plug

(with o’ring and a special mating seal).

This version allows a permanent waterproof

level when immersed at depths down

to 30 meters.

• a retention plate system allowing

insertion/extraction of the contacts without

the need for tooling,

• facilities to use trade backshells with the

electrical thread adaptor (PG).

CLIPPER range

is composed of :

• 4 sizes of shell in molded black

thermoplastic material

(size 1/2/3/4).

• 7 contact layouts

(4/9/14/18/26/31/40 contacts).

• #20, #16 contacts, machined or stamped

and formed, crimp, solder or PC tail

termination.

• An adaptor with electrical PG thread for PG

backshells.

• Backnut with grommet facilities.

4

Share Link: