WL-1A100P1 Ver la hoja de datos (PDF) - OMRON Corporation
Número de pieza
componentes Descripción
Fabricante
WL-1A100P1 Datasheet PDF : 23 Pages
| |||
Contact Form
Standard Models/Weather-resistant Models
Without Operation Indicator
(black)COM
With Operation Indicator
(Lit when Not Actuated)
<24 VDC LED>
(black)COM
NC(red)
NO(white)
E
(blue) *2 (Yellow/green stripes) *1
(green) *2
NC(red)
NO(white)
(blue) *2
E
(Yellow/green) *1
(green) *2
15kΩ
<100 VAC LED>
(black)COM
NC(red)
NO(white)
E
(blue) *2 (Yellow/green) *1
(green) *2
68kΩ
Connector Models for ASI Devices (-M1J)
Without Operation Indicator
Pin No.3 COM
NO Pin No.4
With Operation Indicator
(Lit when Not Actuated)
Pin No.3 COM
NO Pin No.4
R
For DC
Positioning piece*4
NO
COM
D4C
Pre-wired Models (-AK1EJ@, -DK1EJ@)
Without Operation Indicator
Pin No.3 COM
NC Pin No.2
NO Pin No.4
E *3
With Operation Indicator
(Lit when Not Actuated)
<24 VDC LED>
Pin No.3 COM
NC Pin No.2
NO Pin No.4
E *3
<100 VAC LED>
Pin No.3 COM
15kΩ
NC Pin No.2
NO Pin No.4
E *3
68kΩ
For AC
Positioning piece*4
NC
For DC
Positioning piece*4
NC
NO
COM
NO
COM
*1. Yellow/green: VCTF oil-resistant cable
Green: VCTF cable
*2. SJT(O) cable approved by UL and CSA.
*3. E (ground) is not grounded.
*4. The position of the positioning piece is not fixed. Using an L-shaped
connector may result in failure. Use only a straight connector.
Note: “Lit when not Actuated” means that when the actuator is in the free
position, the indicator is lit, and when the actuator is turned or pushed and
the contact comes into contact with the NO side, the indicator turns OFF.
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 All Rights Reserved.
8
Share Link: 