WL-1A100P1 Ver la hoja de datos (PDF) - OMRON Corporation
Número de pieza
componentes Descripción
Fabricante
WL-1A100P1 Datasheet PDF : 23 Pages
| |||
D4C
Engineering Data
Electrical Durability
D4C-1@@@, -2@@@, -3@@@
500
Operating temperature: 20±2°C
Operating humidity: 65±5°C
300
Operating frequency: 30 operations/min
(cosΦ= 1, L/R = 0)
100
50
125 VAC
30
10
250 VAC
5
3
D4C-4@@@, -5@@@, -6@@@
1,000
700
500
300
Operating temperature: 5°C to 35°C
Operating humidity: 40% to 70%
Operating frequency: 30 operations/min
(cosΦ=1, L/R = 0)
125 VAC
100
50
30
30 VDC
10
5
3
1
0
1
2
3
4
5
6
7
Switching current (mA)
0
20
40
60
80
100
120
Switching current (mA)
Leakage Current for LED-indicator Models
The leakage currents and resistances of LED-indicator models are given in the following table.
Model
D4C-2@@@
D4C-3@@@
D4C-5@@@
D4C-6@@@
Voltage
125 VAC
30 VDC
125 VAC
30 VDC
Leakage current
1.7 mA
1.7 mA
1.7 mA
1.7 mA
Resistance
68 kΩ
15 kΩ
68 kΩ
15 kΩ
Structure and Nomenclature
Structure
Standard Models
Roller Lever Models Without Indicator
Roller
O-ring
(NBR)
Lever
Built-in switch
Weather-resistant Models
Roller Lever Models Without Indicator
Roller
The roller is made of self-lubricating sintered
stainless steel and boasts high resistance to
wear.
Shaft Section Seal
By fitting an O-ring to the rotary shaft and with
an appropriate interference of the screws,
high-sealing properties are maintained. The O-ring
is made of silicone rubber and is resistant to temperature
changes and adverse weather conditions.
Head-mounting
Screw
Diaphragm
The diaphragm is made of silicone rubber
and is resistant to temperature changes
and adverse weather conditions.
Cable
Vinyl cabtire cable and is resistant
to adverse weather conditions.
O-ring
(NBR)
Diaphragm (NBR)
Molded resin
Protective cap
(NBR)
Ground terminal
Cable
Lever
The lever forged of anti-corrosive aluminium
alloy features high corrosion resistances
and outstanding ruggedness.
Roller Lever Setscrew
This screw is made of stainless steel and has high
corrosion resistance.
Rotary Shaft
The shaft is made of stainless steel
decreasing the likelihood of rusting.
Built-in Switch
Both standard load and microload models available.
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 All Rights Reserved.
7
Share Link: 