AP78L05
5.0V OUTPUT 3-TERMINAL POSITIVE REGULATOR
Electrical Characteristics (All Output Voltage Versions)
Limits in standard typeface are for TA=25℃, Bold typeface applies over TJ = -20℃ to 125℃ for TO92-3L, SOT89-3L and SOP-8L
Packages. Unless otherwise specified: VIN=10V, IO=40mA, CI=0.33μF, CO=0.1μF.
Symbol
Parameter
Conditions
Min. Typ. Max. Unit
VO
Output Voltage
7V≤VIN≤20V
1mA≤IO≤40mA
1mA≤IO≤70mA
ΔVO Line Regulation
7V≤VIN≤20V
8V≤VIN≤20V
ΔVO Load Regulation
1mA≤IO≤100mA
1mA≤IO≤40mA
IQ
Quiescent Current
ΔIQ
Quiescent Current Change 8V≤VIN≤20V
1mA≤IO≤40mA
Vn
Output Noise Voltage
f=10Hz to 100kHz
(Note 5)
ΔVIN/ΔVOUT Ripple Rejection
f=120Hz
8V≤VIN≤16V
IPK
Peak Output Current
ΔVO/ΔT
Average Output Voltage
Tempco
IO=5mA
4.8
5
5.2
4.75
5.25
V
4.75
5.25
18
10
75
54
mV
20
5
60
30
mV
3
5
1.0
mA
0.1
-
40
μV
47
62
dB
140
mA
-0.65
mV/ oC
Minimum Value of Input
VIN(Min) Voltage Required to
Maintain Line Regulation
6.7
7
V
θJA
Thermal Resistance
Junction to Ambient
θJC
Thermal Resistance
Junction to Case
TO92-3L (Note 6)
SOP-8L (Note 7)
SOT89-3L (Note 8)
TO92-3L (Note 6)
SOP-8L (Note 7)
SOT89-3L (Note 8)
176
153
145
oC/W
33
18
25
Notes:
5. Recommend 0.01μF minimum load capacitance at output to suppress high frequency noise.
6. Test conditions for TO92-3L: No heat sink, no air flow.
7. Test conditions for SOP-8L: Device mounted on 2oz copper, minimum recommended pad layout, FR-4 PCB.
8. Test conditions for SOT89-3L: Device mounted on FR-4 substrate PC board, 2oz copper, with minimum recommended pad layout.
AP78L05 Rev. 6
4 of 10
www.diodes.com
FEBRUARY 2008
© Diodes Incorporated