74HC174 Ver la hoja de datos (PDF) - NXP Semiconductors.

Número de pieza

componentes Descripción

Fabricante

74HC174

Hex D-type flip-flop with reset; positive-edge trigger

NXP Semiconductors. 

74HC174; 74HCT174

Hex D-type flip-flop with reset; positive-edge trigger

Rev. 3 — 16 April 2013

Product data sheet

1. General description

The 74HC174; 74HCT174 are hex positive edge-triggered D-type flip-flops with individual

data inputs (Dn) and outputs (Qn). The common clock (CP) and master reset (MR) inputs

load and reset all flip-flops simultaneously. The D-input that meets the set-up and hold

time requirements on the LOW-to-HIGH clock transition is stored in the flip-flop and

appears at the Q output. A LOW on MR causes the flip-flops and outputs to be reset LOW.

Inputs include clamp diodes. This enables the use of current limiting resistors to interface

inputs to voltages in excess of VCC.

2. Features and benefits

 Input levels:

 For 74HC174: CMOS level

 For 74HCT174: TTL level

 Six edge-triggered D-type flip-flops

 Asynchronous master reset

 Complies with JEDEC standard no. 7A

 ESD protection:

 HBM JESD22-A114F exceeds 2000 V

 MM JESD22-A115-A exceeds 200 V.

 Multiple package options

 Specified from 40 C to +85 C and 40 C to +125 C.

3. Ordering information

Table 1. Ordering information

Type number Package

Temperature range Name

74HC174N

40 C to +125 C DIP16

74HCT174N

74HC174D

40 C to +125 C SO16

74HCT174D

74HC174DB 40 C to +125 C SSOP16

74HCT174DB

74HC174PW 40 C to +125 C TSSOP16

74HCT174PW

Description

plastic dual in-line package; 16 leads (300 mil)

plastic small outline package; 16 leads; body width

3.9 mm

plastic shrink small outline package; 16 leads;

body width 5.3 mm

plastic thin shrink small outline package; 16 leads;

body width 4.4 mm

Version

SOT38-4

SOT109-1

SOT338-1

SOT403-1

Share Link: