298D106X06R3M2T(2007) Ver la hoja de datos (PDF) - Vishay Semiconductors

Número de pieza

componentes Descripción

Fabricante

298D106X06R3M2T
(Rev.:2007)

Solid Tantalum Chip Capacitors MICROTAN™ Lead Frameless Molded

Vishay Semiconductors 

298D

Vishay Sprague

Solid Tantalum Chip Capacitors

MICROTANTM Lead Frameless Molded

CAPACITORS PERFORMANCE CHARACTERISTICS

ELECTRICAL PERFORMANCE CHARACTERISTICS

ITEM

Category Temperature Range

Capacitance Tolerance

Dissipation Factor (at 120 Hz)

ESR (100 kHz)

Leakage Current

Reverse Voltage

Temperature Derating

PERFORMANCE CHARACTERISTICS

- 55 °C to + 85 °C (to + 125 °C with voltage derating)

± 20 %, ± 10 % (at 120 Hz) 2 Vrms at + 25 °C using a capacitance bridge

Limits per Standard Ratings Table. Tested via bridge method, at 25 °C, 120 Hz.

Limits per Standard Ratings Table. Tested via bridge method, at 25 °C, 100 kHz.

After application of rated voltage applied to capacitors for 5 minutes using a steady source of power with

1 kΩ resistor in series with the capacitor under test, leakage current at 25 °C is not more than described in.

See graph below for the appropriate adjustment factor.

Capacitors are capable of withstanding peak voltages in the reverse direction equal to: 10 % of the DC

5 % of the DC rating at + 85 °C

Vishay does not recommended intentional or repetitive application of reverse voltage

If capacitors are to be used at temperatures above + 25 °C, the permissible rms ripple current or voltage

1.0 at + 25 °C

0.9 at + 85 °C

0.4 at + 125 °C

Maximum Permissible Power

Dissipation at 25 °C

(W) in free air

Operating Temperature

M-Case: 0.025

P-Case: 0.045

+ 85 °C RATING

WORKING VOLTAGE

SURGE VOLTAGE

4

5.2

6.3

8

10

13

16

20

20

26

25

32

35

46

50

65

+ 125 °C RATING

WORKING VOLTAGE SURGE VOLTAGE

2.7

3.4

4

5

7

8

10

12

13

16

17

20

23

28

33

40

TYPICAL LEAKAGE CURRENT FACTOR RANGE

100

10

1.0

0.1

0.01

+ 125 °C

+ 85 °C

+ 55 °C

+ 25 °C

0 °C

- 55 °C

0.001

0

10 20 30 40 50 60 70 80 90 100

PERCENT OF RATED VOLTAGE

Notes

• At + 25 °C, the leakage current shall not exceed the value listed in the Standard Ratings Table.

• At + 85 °C, the leakage current shall not exceed 10 times the value listed in the Standard Ratings Table.

• At + 125 °C, the leakage current shall not exceed 12 times the value listed in the Standard Ratings Table

www.vishay.com

40

For technical questions, contact: tantalum@vishay.com

Document Number: 40065

Revision: 22-Oct-07

Share Link: