GB60S Ver la hoja de datos (PDF) - Unspecified

Número de pieza

componentes Descripción

Fabricante

GB60S

60W Single Output

Unspecified 

General Specifications (continued)

GB60S

60W Single Output

General Purpose

Earth Leakage

Current

<1mA@240Vac, NC

Power Factor Not Applicable

Efficiency 88% typical (83% for 12V& 85% for 15V)

Output Power 60W continuous (55W for 12V models)

Peak Output

Power

Not Applicable

Ripple and Noise See chart above

Output Voltage See chart

Voltage

Adjustability

Fixed

Minimum Load Not required

Short Circuit

Protection

Hiccup Mode

Overtemperature

Protection

Self-recovering

Safety Standards

CSA/EN/IEC/UL60950-1, 2nd Edition. See below

for detailed standards information.

Input-Output: 4000Vac

Isolation Input-Ground: 1800Vac

Output-Ground: 500Vac

Operating -40C start up. -20C to 80C with derating

Temperature specified in Fig.1

Output Power

Derating

See Fig.1 on page 4

Storage

Temperature

-40°C to +85°C

Relative Humidity 5% to 95%, non-condensing

Altitude

Operating: 3000 meters

Non-operating: 40,000 ft.

Total Regulation +/- 2%. See chart

Transient 500µS max. to 1%, 50% load step. 0.2A/µS,

Response 3.5% deviation typical

Switching

Frequency

65kHz, typical

Dimensions

2.0” x 3.0” x 1.0”

50.8 x 76.2 x 25.4mm

MTBF Over 600,000 hours per Telcordia

Random Vibration per MIL-STD-810E, Method

Vibration 514.4, Cat. 1, Figure 514.4.1, 1 hour in each of 3

axes.

Shock

Half-sine, 40 gpk, 10 mS duration, +/- in each of

3 axes, 6 shocks total

Weight 126g

Notes:

1. Specifications subject to change without notice.

2. All dimensions in inches (mm), tolerance is ±.02”.

3. Mounting holes should be connected together for EMI purpose

4. FG is safety ground connection

5. Specifications are for convection rating at factory settings with 115Vac input and 25°C ambient unless otherwise stated.

6. This power supply requires mounting on metal standoffs 0.20” (5mm) in height.

www.slpower.com

GB60S 18-DEC-14

2

Share Link: