MAC15-10 Ver la hoja de datos (PDF) - Motorola => Freescale
Número de pieza
componentes Descripción
Fabricante
MAC15-10 Datasheet PDF : 4 Pages
| |||
MOTOROLA
SEMICONDUCTOR TECHNICAL DATA
Triacs
Silicon Bidirectional Thyristors
. . . designed primarily for full-wave ac control applications, such as solid-state relays,
motor controls, heating controls and power supplies; or wherever full-wave silicon
gate controlled solid-state devices are needed. Triac type thyristors switch from a
blocking to a conducting state for either polarity of applied anode voltage with positive
or negative gate triggering.
• Blocking Voltage to 800 Volts
• All Diffused and Glass Passivated Junctions for Greater Parameter Uniformity
and Stability
• Small, Rugged, Thermowatt Construction for Low Thermal Resistance, High Heat
Dissipation and Durability
• Gate Triggering Guaranteed in Three Modes (MAC15FP Series) or Four Modes
(MAC15AFP Series)
MAC15FP
Series
MAC15AFP
Series
ISOLATED TRIACs
THYRISTORS
15 AMPERES RMS
200 thru 800 VOLTS
MT2
MT1
CASE 221C-02
G
STYLE 3
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted.)
Rating
Repetitive Peak Off-State Voltage(1) (TJ = –40 to +125°C,
1/2 Sine Wave 50 to 60 Hz, Gate Open)
MAC15-4FP, MAC15A4FP
MAC15-6FP, MAC15A6FP
MAC15-8FP, MAC15A8FP
MAC15-10FP, MAC15A10FP
On-State RMS Current (TC = +80°C)(2)
Full Cycle Sine Wave 50 to 60 Hz (TC = +95°C)
Peak Nonrepetitive Surge Current (One Full Cycle, 60 Hz, TC = +80°C)
preceded and followed by rated current
Symbol
VDRM
IT(RMS)
ITSM
Value
200
400
600
800
15
12
150
Unit
Volts
Amps
Amps
Peak Gate Power (TC = +80°C, Pulse Width = 2 µs)
PGM
20
Watts
Average Gate Power (TC = +80°C, t = 8.3 ms)
PG(AV)
0.5
Watt
Peak Gate Current
IGM
2
Amps
Peak Gate Voltage
p RMS Isolation Voltage (TA = 25°C, Relative Humidity 20%)
VGM
V(ISO)
10
1500
Volts
Volts
Operating Junction Temperature
TJ
–40 to +125
°C
Storage Temperature Range
Tstg
–40 to +150
°C
1. VDRM for all types can be applied on a continuous basis. Blocking voltages shall not be tested with a constant current source such that the
voltage ratings of the devices are exceeded.
2. The case temperature reference point for all TC measurements is a point on the center lead of the package as close as possible to the plastic
body.
Motorola Thyristor Device Data
3–63
Share Link: 