JANTX1N6111AUSE3 Ver la hoja de datos (PDF) - Microsemi Corporation

Número de pieza

componentes Descripción

Fabricante

JANTX1N6111AUSE3

Voidless Hermetically Sealed Surface Mount Bidirectional Transient Voltage Suppressors

Microsemi Corporation 

1N6103AUS – 1N6137AUS

MECHANICAL and PACKAGING

• CASE: Hermetically sealed voidless hard glass with tungsten slugs.

• TERMINALS: Tin/lead plate over copper. RoHS compliant matte-tin is available on commercial grade only.

• MARKING: None.

• POLARITY: No polarity marking for these bidirectional TVSs.

• TAPE & REEL option: Standard per EIA-481-B. Consult factory for quantities.

• WEIGHT: Approximately 539 milligrams.

• See Package Dimensions on last page.

Applicable to entire series:

Reliability Level

JAN = JAN Level

JANTX = JANTX Level

JANTXV = JANTXV Level

Blank = commercial

JEDEC type number

See Electrical Characteristics

table

PART NOMENCLATURE

JAN 1N6103 A US (e3)

RoHS Compliance

e3 = RoHS compliant (available

on commercial grade only)

Blank = non-RoHS compliant

Surface Mount Package

Voltage Tolerance

A = Standard

Blank =5% higher VC, 5% lower

min. V(BR) and 5% lower IPP

Applicable to 1N6103(A)US – 1N6118(A)US only:

JANS 1N6103 A US

Reliability Level

JANS = JANS Level

JEDEC type number

See Electrical Characteristics

table

Surface Mount Package

Voltage Tolerance

A = Standard

Blank =5% higher VC, 5% lower

min. V(BR) and 5% lower IPP

Applicable to 1N6119(A)US – 1N6137(A)US only:

MSP 1N6119 A US (e3)

Reliability Level

MSP (reference JANS)

JEDEC type number

See Electrical Characteristics

table

RoHS Compliance

e3 = RoHS compliant

Blank = non-RoHS compliant

Surface Mount Package

Voltage Tolerance

A = Standard

Blank =5% higher VC, 5% lower

min. V(BR) and 5% lower IPP

T4-LDS-0277-1, Rev. 1 (121354)

©2013 Microsemi Corporation

Page 2 of 6

Share Link: