MV1N5955CGE3 Ver la hoja de datos (PDF) - Unspecified
Número de pieza
componentes Descripción
Fabricante
MV1N5955CGE3 Datasheet PDF : 5 Pages
| |||
1N5913BG – 1N5956BG
MECHANICAL and PACKAGING
• CASE: Hermetically sealed voidless hard glass with tungsten slugs.
• TERMINALS: Tin/lead or RoHS compliant matte/tin over copper. Solderable per MIL-STD-750, method 2026.
• MARKING: Part number.
• POLARITY: Cathode indicated by band. Diode to be operated with the banded end positive with respect to the opposite end for
Zener regulation.
• TAPE & REEL option: Standard per EIA-296 (add TR suffix to part number). Consult factory for quantities.
• WEIGHT: Approximately 340 milligrams.
• See package dimensions on last page.
PART NOMENCLATURE
Reliability Level*
MQ
MX
MV
MSP
Blank = Commercial
*(refer to MicroNote 129)
JEDEC type number
(See Electrical Characteristics
table)
MQ 1N5913 B G (e3)
RoHS Compliance
e3 = RoHS compliant
Blank = non-RoHS compliant
Glass Casing
Tolerance Level
A = 10 %
B=5%
C=2%
D = 1%
Symbol
VZ
IZ, IZT, IZK
ZZT or ZZK
VF
IR
I ZM
SYMBOLS & DEFINITIONS
Definition
Zener Voltage: The Zener voltage the device will exhibit at a specified current (IZ) in its breakdown region.
Regulator Current: The dc regulator current (IZ), at a specified test point (IZT), near breakdown knee (IZK).
Regulator Impedance: The small signal impedance of the diode when biased to operate in its breakdown region with
IZT applied at IZ or IZK respectively. This has also been known as Zener or dynamic impedance (ZZT or ZZK).
Forward Voltage: The positive dc anode-cathode voltage the device will exhibit at a specified forward current.
Reverse Current: The dc current flowing from the external circuit into the cathode terminal at the specified voltage VR.
Maximum Regulator (Zener) Current: The maximum rated dc current for the specified power rating.
T4-LDS-0300, Rev. 1 (6/6/13)
©2013 Microsemi Corporation
Page 2 of 5
Share Link: 