CENB1010A0503B01 Ver la hoja de datos (PDF) - Unspecified

Número de pieza

componentes Descripción

Fabricante

CENB1010A0503B01

Universal 10 Watt Series ITE Switch-Mode Power Supply

Unspecified 

CENB1010

Universal 10 Watt Series

ITE Switch-Mode Power Supply

•100-240VAC Universal Input Range

•Meets EISA2007, CEC Efficiency Level V,

EU (EC) No 278/2009 Phase II

•Desktop & Wall Plug Styles

•5V to 48V Single Output Models, up to 12W

•Modified and Custom Designs Available

•Regulated Output with Low Ripple

•Impact-Resistant Polycarbonate Enclosure

•No load Power Consumption <0.3W

•Limited Power Source

•Certified to UL/EN/IEC60950-1, 2nd Edition

3 Year Warranty

RoHS LPS

Specifications

All Specifications are typical at nominal input, full load at 25°C unless otherwise stated.

AC Input

Input Current

Inrush Current

100-240VAC, -/-10%, 47-63 Hz, 1∅

100Vac: 0.27A

60 A peak max at 264 Vac

MTBF

Hold-up Time

Overload Protection

>250,000 hours (calculated)

18 ms min. @ 115Vac, 60 ms min. @ 230 Vac

Hiccup Mode

Input Fuse Internal Primary Current Fuse provided (1A, 250Vac rated) Short Circuit Protection

Hiccup Mode

Efficiency

Output Voltage

Meets EISA2007, CEC Efficiency Level V,

EU (EC) No 278/2009 Phase II

See chart

Topology

Safety Standards

Switching – Fixed Frequency Flyback

EN/IEC/CSA/UL60950-1, 2nd Edition, LPS

Output Power

Ripple and Noise

See chart

1% pk-pk max., 20MHz BW

Line & Load Voltage Regulation

Line: +/- 1%, Load: +/-5%

Minimum Load

Case Material

Case Dimensions

Weight

Not required

Black 94V-0 Polycarbonate

84 x 47 x 32mm. See outline drawing

110g

EMC, Radiated & Conducted

See Chart below

Dielectric Withstand

Input-Output: 4,242Vdc,

Input-Ground: 1,500 Vac, Output-Ground: 500 Vdc

Operating Temperature

Storage Temperature

0° to 40°C, no derating

(0 to 55°C for 5V model, see derating chart)

-30 to +85°C

Relative Humidity

5% to 95%, non-condensing

Altitude

0 to 10,000 ft

Output Cable

#20AWG (UL2468), 1500mm, 2 conductor

Output Connector

2.5mm barrel type (Ault #3), center contact (+)

Other options available, contact the factory for details

Conducted Emissions

Radiated Emissions

Line Frequency Harmonics

Voltage Fluctuations/Flicker

Static Discharge Immunity

Radiated RF Immunity

EFT/Burst Immunity

Line Surge Immunity

Conducted RF Immunity

Power Frequency Magnetic Field Immunity

Voltage Dip Immunity

EMC Specifications

EN55022 Class B, FCC Part 15, Class B.

EN55022 Class B, FCC Part 15, Class B.

EN61000-3-2, Class A

EN61000-3-3

EN61000-4-2, 6kV Contact Discharge, 8kV air discharge

EN61000-4-3, 3V/m.

EN61000-4-4, 2kV/5kHz.

EN61000-4-5, 1kV differential, 2kV common-mode

EN61000-4-6, 3Vrms

EN61000-4-8, 3A/m

EN61000-4-11, Criteria B

________________________________________________________________________________________________________________________________ 1 of 3

SL Power Electronics Corp • 6050 King Drive Ventura, CA 93003 • Phone 805.486.4565 • Fax 858.712.2040 • Email: info@slpower.com • www.slpower.com

Share Link: