HV9150K6-G Ver la hoja de datos (PDF) - Supertex Inc
Número de pieza
componentes Descripción
Fabricante
HV9150K6-G Datasheet PDF : 15 Pages
| |||
Ordering Information
Part Number Package Option
HV9150K6-G
16-Lead (3x3) QFN
-G denotes a lead (Pb)-free / RoHS compliant package
Packing
3000/Reel
Pin Configuration
16
XNN 1
HV9150
XFF
Absolute Maximum Ratings*
Parameter
Value
VLL, Input voltage supply
VDD, Charge pump output voltage
Logic input levels
Continuous power dissipation
(Note: on a 3” by 4” FR4 PCB @Ta = 25°C)
Junction temperature range
-0.5V to 5.0V
-0.5V to 13.6V
-0.5V to VLL +0.5V
3000mW
-25°C to +125°C
Storage temperature range
-65°C to +125°C
* All voltages referenced to device GND.
Stresses beyond those listed under “Absolute Maximum Ratings” may cause
permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in
the operational sections of the specifications is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect device reliability.
Typical Thermal Resistance
Package
16-Lead QFN
θja
33°C/W
IPF
GP
ERaGP
ICVG
HDaTVP
HD
16-Lead QFN
(top view)
Note: Pads are at the bottom of the package. Center heat slug is
at ground potential.
Product Marking
H150
YWLL
Y = Last Digit of Year Sealed
W = Code for Week Sealed
L = Lot Number
= “Green” Packaging
Package may or may not include the following marks: Si or
16-Lead QFN
Recommended Operating Conditions
Symbol Parameter
Min
Typ
Max Units Conditions
VLL Input voltage (CP mode)
VIH High-level input voltage
VIL
Low-level input voltage
2.7
-
4.5
V ---
0.8VLL
-
VLL
V ---
0
-
0.2VLL
V ---
Power-Up and Power-Down Sequence
Power-up sequence should be the following:
1. Connect ground.
2. Apply VIN.
3. Set all inputs to a known state.
Power-down sequence should be the reverse of the above.
Doc.# DSFP-HV9150
NR031914
Supertex inc.
2
www.supertex.com
Share Link: 