M65580MAP Ver la hoja de datos (PDF) - MITSUBISHI ELECTRIC
Número de pieza
componentes Descripción
Fabricante
M65580MAP Datasheet PDF : 30 Pages
| |||
Preliminary
Note : This is not a final specification.
Some of information in this document are subject to changes.
Mitsubishi Semiconductor<Digital IC>
M65580MAP-XXXFP
Digital Video/Chroma/Deflection+MCU
Symbol
IOL1 (MCU)
IOL2 (MCU)
f(XIN) (MCU)
Parameter
Low average output current (See note 2)
P00-P07, P10, P15, P16, P20-P27, P30, P31, P52, P53
Low average output current (See note 2) P11-P14
Oscillation frequency (for CPU operation) XIN
(See note 5)
Min.
7.9
Limits
Typ.
Unit
Max.
2
mA
6
mA
8.0
8.1 MHz
f(XCIN) (MCU) Oscillation frequency (for sub-clock operation) XCIN
29
FSCIN (MCU) Oscillation frequency (for OSD standard clock) FSCIN
fhs1 (MCU)
Input frequency TIM2, TIM3, INT1, INT2, INT3
fhs2 (MCU)
Input frequency SCLK
fhs3 (MCU)
Input frequency SCL1, SCL2
VI (MCU)
Input amplitude video signal CVIN
1.5
32
35 kHz
3.58
MHz
100 kHz
1
MHz
400 kHz
2.0
2.5
V
Note 1: The total current that flows out the MCU must be 20mA or less.
2: The total input current to MCU (IOL1+IOL2) must be 30mA or less.
3: Use a quartz-crystal oscillator or a ceramic resonator for the CPU oscillation circuit. When using the data
slicer, use 8MHz.
4: Pin name in each parameter is described pin names.
(1) Dedicated pins: dedicated pin name.
(2) Double-/Triple-function ports.
When the same limits: I/O port name.
When the limits of function except ports are different from I/O port limits; function pin name.
5: P06, P07, P15, P23, P24 have the hysteresis when these pins are used as interrupt input pins or timer pins.
P11-P14 have the hysteresis when these pins are used as multi-master I2C-Bus interface ports.
P20-P22 have the hysteresis when these pins are used as serial I/O pins.
Thermal derating
THERMAL DERATING (MAXIMUM RATING)
2.0
1.5
1.46
1.0
0.88
0.5
0 25 50 65 75 100 125 150
AMBIENT TEMPERATURE Ta (˚C)
MITSUBISHI
4
Share Link: 