DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

DRR1-2322 Ver la hoja de datos (PDF) - HP => Agilent Technologies

Número de pieza
componentes Descripción
Fabricante
DRR1-2322 Datasheet PDF : 4 Pages
1 2 3 4
DRR1-23XX Typical Performance
28
Spec Max
26
30
T = +25°C
T = –30°C
25 T = +70°C
24
22
T = +25°C
20 T = –30°C
T = +70°C
18
Spec Min
16
21
22
23
24
FREQUENCY (GHz)
20
15
10 Spec Min
5
21
22
23
24
FREQUENCY (GHz)
Figure 1. Conversion Gain vs.
Frequency.
Figure 2. Image Rejection vs.
Frequency.
6
Spec Max
5
4
3
T = +25°C
T = –30°C
T = +70°C
2
21
22
23
24
FREQUENCY (GHz)
Figure 3. Noise Figure vs. Frequency.
-12
-14
-16
-18
T = +25°C
T = –30°C
T = +70°C
-20
-22
Spec Min
-24
21
22
23
24
FREQUENCY (GHz)
Figure 4. Power In at P1dB Out vs.
Frequency.
-40
-60
-80
-100
-120
-140
1
10
100
KHz Offset from Carrier
1000
Figure 5. Phase Noise at 23 GHz vs.
KHz Offset from Carrier.
24
400
TUNING VOLTAGE
350
23
300
22
MODULATION
SENSITIVITY
250
21
200
1 2 3 4 5 6 7 8 9 10 11 12
TUNING VOLTAGE (V)
Figure 6. Tuning Voltage vs. Frequency
and Modulation Sensitivity.
Powering Up Instructions
The -5 volts must be applied to the
receiver module before applying
the +5 volts. Likewise when
shutting down the receiver
module the +5␣ volts must be
removed before the -5 volts is
turned off. The +8.5␣ volts can be
turned on in any sequence. Failure
to follow this procedure could
cause permanent damage to the
module.
Mounting Instructions
Case must be mounted firmly,
with screws, to an adequate
metallic structure that has suffi-
cient thermal properties to
maintain the module case at a
temperature not to exceed 70°C.
Product Options
Specify part number followed by option. For example:
DR R 1 – 23 X X
Model Number Prefix = Digital Radio
R = Receiver Module
Internal Use
1 = SMA Connector
2 = WR-42 Waveguide Connector
1 = 630 MHz IF Frequency
2 = 1260 MHz IF Frequency
23 = 21.2 to 23.6 GHz Frequency Band
8-6

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]