CMX615 Ver la hoja de datos (PDF) - MX-COM Inc

Número de pieza

componentes Descripción

Fabricante

CMX615

Digital Line to POTS Interface

MX-COM Inc  

D/615/4 December 1999

Features

• Pre-Programmed Tone Generators

• Fully Integrated DTMF Encoder

• SPM Generator

• Simple Serial Control Interface

• ‘Zero-Power’ (1µA) Standby Mode

• 3.58MHz Xtal/Clock

• V23/Bell 202 FSK Generator

• Digital Ringing Voltage Generator

CMX615

Digital Line to

POTS Interface

Provisional Issue

Applications

• Digital Line to POTS Interface

• Subscriber Terminal Adapters

• Wireless Local Loop

• Computer Telephony Integration

• Telephone/Radio Patch Systems

• Pair Gain Systems

• Billing/SPM Systems

1.1 Brief Description

The CMX615 is an integrated telecom tone generator and DTMF encoder designed for ISDN interfaces,

Wireless Local Loop and Analogue to Digital Phone Conversion systems. The tone generator covers an

extensive range of pre-programmed tones used in analogue phone systems (POTS). Three outputs are

provided: ‘Ringing signals’, ‘In-band tones or FSK data’, and ‘12kHz/16kHz Metering pulses’. Simple software

control facilitates the interface to a wide range of commonly used µCs and SLICs, enabling a comprehensive

analogue telephone line presentation.

The DTMF encoder generates the appropriate DTMF tones for the POTS interface. DTMF tone pairs can be

encoded along with each tone singly or with other dual tone signals, such as those used in CIDCW systems

and ‘On Hook’ signalling systems.

Other tone standards supported are: Fax and Modem ‘answer’ and ‘originate’, ITU (CCITT) ‘R1’ and ‘R2’

signals, and sufficient tones for simple melody generation. Communication to and from the host µController is

performed by a ‘C-BUS’ serial interface, which is compatible with the ‘SPI’ interface.

© 1999 Consumer Microcircuits Limited

Share Link: