XC6209/6212
Series
■PRODUCT CLASSIFICATION
●Selection Guide
The following options for the CE pin logic and internal pull-up/down are available:
High Active + no pull-down resistor built-in (standard)
High Active+ 2MΩ pull-down resistor built-in <between CE-VSS> (semi-custom)
Low Active + no pull-up resistor built-in (semi-custom)
Low Active + 2MΩ pull-up resistor built-in <between VIN-CE> (semi-custom)
Note: *With the pull-up resistor or pull-down resistor built-in types, the supply current during operation will increase by
VIN / 2MΩ (TYP.).
●Ordering Information
XC6209/12①②③④⑤⑥
DESIGNATOR
DESCRIPTION
①
Type of Regulator
(*1)
CE Pin Logic
②③
Output Voltage
Output Voltage
④
Accuracy
⑤
Packages
⑥
Device Orientation
SYMBOL
A/E
B/F
C/G
D/H
09~60
2
1
A
B
M
P
D
R
L
DESCRIPTION
: High Active (pull-down resistor built-in, semi-custom)
: High Active (no pull-down resistor built-in, standard)
: Low Active (pull-up resistor built-in, semi-custom)
: Low Active (no pull-up resistor built-in, standard)
: e.g. 20:2.0V,
30:3.0V,
: 100mV increments, ±2% accuracy (*2)
e.g. ②=2, ③=8, ④=2 → 2.80V, ±2%
: 100mV increments, ±1% accuracy (*2)
e.g. ②=2, ③=8, ④=1 → 2.80V, ±1%
: 50mV increments, ±2% accuracy (*2)
e.g. ②=2, ③=8, ④=A → 2.85V, ±2%
: 50mV increments, ±1% accuracy (*2)
e.g. ②=2, ③=8, ④=B → 2.85V, ±1%
: SOT-25 (SOT-23-5)
: SOT-89-5 (for XC6209 series only)
: USP-6B (for XC6209 series only)
: Embossed tape, standard feed
: Embossed tape, reverse feed
(*1) Maximum output current of E to H series depend on the setting voltage.
(*2) Within ±30mV (VOUT ≦ 1.5V)
3/25