WD-30-B Ver la hoja de datos (PDF) - Unspecified

Número de pieza

componentes Descripción

Fabricante

WD-30-B

Tools for Telecom, Fiber Optics, CATV, Satellite, Security & Alarm,Wireless and Electronics Industries

Unspecified 

CAN, BOOTH, LINESMAN WRENCHES

M-216C/EX

M-216C/REX

M-216C/RX

M-216CS22

M-216CKIT

CAN SOCKET WRENCH

Double end can socket wrench, 3/8" and 7/16" hex,

orange plastic handle in either our standard or

ergonomic design. Used in placing fuses in cable

terminals and connecting wires to fuses and

binding posts. The walls on both sockets are thin

enough so they can be used to work locking

devices on most terminals and cabinets. 7" long.

JONARD

P/N

M-216C/EX

M-216C/REX

M-216C/RX

M-216CS22

M-216CKIT

DESCRIPTION

Ergonomic 1” Dia. Handle,

Hex Outer Socket

Ergonomic 1” Dia. Handle,

Round Outer Socket

Standard Handle,

Round Outer Socket

Ergonomic 1” Dia. Handle, Hex Outer

Socket with 22 AWG Stripper Blade

Ergonomic 1” Dia. Handle, Hex Outer

Socket with 22 AWG Stripper Blade

Can Wrench and Security Key Insert

SECURITY KEY INSERT

Designed with a double-ended hex adapter for two

sizes of pin-in-head security fasteners. Simply slip

the key into the 3/8" side of a can wrench and you

are ready for either a 5/16" or 5/32" hex security

screw. This is a reversible insert tool. One end is for

SLC Cabinets and the other is for most network

interface boxes.

JONARD

P/N

SK-51632

DESCRIPTION

Security Key Insert

BW-532-3

SK-51632

BW-532

JIC-650

BOOTH WRENCH

Tamperproof hex screwdriver, also known as a

booth wrench or security wrench. It features a 1"

diameter screwdriver handle, 5/32" hex shaft with a

hole drilled in the tip for use with security

tamperproof screws used for telephone and CATV

applications. BW-532 Booth Wrench is 9" long and

the BW-532-3 Booth Wrench is 6" long.

JONARD

P/N

BW-532

BW-532-3

DESCRIPTION

Booth Wrench -Ergonomic design 9”

Booth Wrench -Ergonomic design 6”

LINEMAN’S B WRENCH

Forged and heat treated, this wrench is used on

pole line hardware. It is open-end double-end type

with two sizes of openings at each end and an oval

hole for turning pole steps. The end openings

accommodate nuts for 3/8”, 1/2”, 5/8” and 3/4”

bolts and the head of the 1/2” drive screw. The

faces of the wrench openings are offset to provide

handle clearance. 13” Long.

JONARD

P/N

JIC-650

DESCRIPTION

Lineman’s B Wrench

Phone: (914) 793-0700 • Fax: (914) 793-4527 • sales@jonard.com

INDUSTRIES CORP.

11

Share Link: