DatasheetQ Logo
Electronic component search and free download site. Transistors,MosFET ,Diode,Integrated circuits

VN5050J-E(2006) Ver la hoja de datos (PDF) - STMicroelectronics

Número de pieza
componentes Descripción
Fabricante
VN5050J-E
(Rev.:2006)
ST-Microelectronics
STMicroelectronics ST-Microelectronics
VN5050J-E Datasheet PDF : 23 Pages
1 2 3 4 5 6 7 8 9 10 Next Last
VN5050J-E
Single channel high side driver for automotive applications
Features
General
Max supply voltage
Operating voltage range
Max On-State resistance
Current limitation (typ)
Off state supply current (TYP)
VCC
VCC
RON
ILIMH
IS
41V
4.5 to 36V
50 m
19A
2 µA
Application
All types of resistive, inductive and capacitive
loads
Main
Inrush current active management by power
limitation
Very low stand-by current
3.0V CMOS compatible input
Optimized electromagnetic emission
Very low electromagnetic susceptibility
In compliance with the 2002/95/ec european
directive
Diagnostic Functions
Open drain status output
On state open load detection
Off state open load detection
Thermal shutdown indication
Protections
Undervoltage shut-down
Overvoltage clamp
Output stuck to Vcc detection
Order codes
PowerSSO-12 (Slug down)
Load current limitation
Self limiting of fast thermal transients
Protection against loss of ground and loss of
VCC
Thermal shut down
Reverse battery protection (see Figure 28)
Electrostatic discharge protection
Description
The VN5050J-E is a monolithic device made
using STMicroelectronics VIPower technology. It
is intended for driving resistive or inductive loads
with one side connected to ground. Active VCC pin
voltage clamp protects the device against low
energy spikes (see ISO7637 transient
compatibility table). The device detects open load
condition both in on and off state, when STAT_DIS
is left open or driven low. Output shorted to VCC is
detected in the off state.
When STAT_DIS is driven high, the STATUS pin
is in a high impedance condition.
Output current limitation protects the device in
overload condition. In case of long duration
overload, the device limits the dissipated power to
safe level up to thermal shut-down intervention.
Thermal shut-down with automatic restart allows
the device to recover normal operation as soon as
fault condition disappears..
Package
PowerSSO-12 (slug down)
Part number (Tube)
VN5050J-E
Part number (Tape & Reel)
VN5050JTR-E
March 2006
Rev 1
1/23
www.st.com
23

Share Link: 

datasheetq.com  [ Privacy Policy ]Request Datasheet ] [ Contact Us ]