VE-12H5-K Ver la hoja de datos (PDF) - Fujitsu

Número de pieza

componentes Descripción

Fabricante

VE-12H5-K

POWER RELAY 1 POLE—5 A (MEDIUM LOAD CONTROL)

Fujitsu 

VE SERIES

s SPECIFICATIONS

Contact

Coil

Time Value

Insulation

Life

Other

Item

VE-( ) HME-K

VE-( ) HM-K

VE-( ) HE-K

VE-( ) H-K

VE-( ) HM5-K

VE-( ) H5-K

Arrangement

1 form A (SPST-NO) 1 form C (SPDT) 1 form A (SPST-NO) 1 form C (SPDT)

Material

Gold overlay silver alloy

Silver-cadmium oxide alloy

Style

Single

Resistance (initial) (at 1 A 6 VDC) Maximum 70 mΩ (VE-HM, H)

Maximum 100 mΩ (VE-HME, HE)

Maximum 200 mΩ

Rating (resistive)

5 A 250 VAC

5 A 250 VAC (N.O.) 5 A 250 VAC

3 A 250 VAC (N.C.)

Maximum Carrying Current 7 A

Maximum Switching Power 1,250 VA

1,250 VA (N.O.) 1,250 VA

750 VA (N.C.)

Maximum Switching Voltage 250 VAC, 150 VDC

Maximum Switching Current 5 A

5 A (N.O.)

5A

3 A (N.C.)

Minimum Switching Load*1 10 mA, 5 VDC (VE-HM, H), 100 mA 5 VDC (VE-HME, HE, HM5, H5)

Nominal Power (at 20°C)

Standard type: 0.36 W. High sensitivity type: 0.25 W

Operate Power (at 20°C)

Standard type: 0.177 W. High sensitivity type: 0.13 W

Operating Temperature

Standard: –40°C to +85°C. High sensitivity: –40°C to +90°C (no frost)

Operate (at nominal voltage) Maximum 10 ms

Release (at nominal voltage) Maximum 5 ms

Resistance (at 500 VDC)

Minimum 1,000 MΩ

Dielectric

Strength

between open

contacts

between coil

and contacts

1,000 VAC 1 minute 750 VAC 1 minute 1,000 VAC 1 minute 750 VAC 1 minute

2,000 VAC 1 minute

Surge Strength

Standard type: 4,000 V (at 2 × 10 µs)

High dielectric strength type: 6,000 V (at 2 × 10 µs)

Mechanical

1 × 107 operations minimum

Electrical (at Rating)

Standard Type: 1 × 105 ops. min. High sensitivity type: 5 × 104 ops. min.

Vibration Misoperation

Resistance

Endurance

10 to 55 Hz (double amplitude of 3.3 mm)

10 to 55 Hz (double amplitude of 3.3 mm)

Shock

Misoperation

Resistance

Endurance

100 m/s2 (11 ±1 ms)

500 m/s2 (6 ±1 ms)

Weight

Approximately 8 g

*1 Minimum switching loads mentioned above are reference values. Please perform the confirmation test with the actual

load before production since reference values may vary according to switching frequencies, environmental conditions

and expected reliability levels.

3

Share Link: