UPD168111AMA-6A5 Ver la hoja de datos (PDF) - NEC => Renesas Technology

Número de pieza

componentes Descripción

Fabricante

UPD168111AMA-6A5

MICROSTEP DRIVER FOR DRIVING CAMERA LENS

NEC => Renesas Technology 

µ PD168111A

COMMAND INPUT TIMING CHART

This IC controls the motor by transmitting serial control commands.

Here is an example of the commands.

Internal reset cleared

RESET

;;;;;;;;;;;;;;;;;;;; LATCH

SCLK

SDATA

External

reference

Dummy data

16 bit

D0

Initialization

setting

(wait value setting)

All ‘0’

D1

Pulse

setting,

etc.

D2

Pulse

setting,

etc.

D3

Pulse

setting,

etc.

CLK

Start

point wait

Output depending on

initialization setting

Start point

excitation wait

Output depending on

initialization setting

Pulse output

EXT0

Pulse output

EXT1

Synchronized with pulse timing Synchronized with pulse timing

according to setting of D1

according to setting of D2

Driving period H set by D1

Driving period H set by D2

This IC can change all commands by issuing the LATCH signal once. Therefore, “initialization setting” does not

have to be explicitly performed as shown in the above example.

Immediately after the reset has been cleared, dummy data must be transmitted according to the timing of the

transmit data. For details, refer to SERIAL INTERFACE SPECIFICATIONS.

Data Sheet D16536EJ1V0DS

5

Share Link: