TSH350IDT Ver la hoja de datos (PDF) - STMicroelectronics
Número de pieza
componentes Descripción
Fabricante
TSH350IDT Datasheet PDF : 22 Pages
| |||
Absolute maximum ratings
1
Absolute maximum ratings
TSH350
Table 1. Absolute maximum ratings (AMR)
Symbol
Parameter
Value
Unit
VCC
Vid
Vin
Tstg
Tj
Rthja
Supply voltage (1)
Differential input voltage(2)
Input voltage range(3)
Storage temperature
Maximum junction temperature
Thermal resistance junction to ambient
SOT23-5
SO-8
6
V
+/-0.5
V
+/-2.5
V
-65 to +150
°C
150
°C
250
°C/W
150
Rthjc
Thermal resistance junction to case
SOT23-5
SO-8
80
°C/W
28
Maximum power dissipation(4) (@Tamb=25°C) for Tj=150°C
Pmax
SOT23-5
500
mW
SO-8
830
HBM: human body model (5)
pins 1, 4, 5, 6, 7 and 8
pins 2 and 3
2
kV
0.5
ESD
MM: machine model (6)
pins 1, 4, 5, 6, 7 and 8
pins 2 and 3
200
V
60
CDM: charged device model(7)
pins 1, 4, 5, 6, 7 and 8
pins 2 and 3
1.5
kV
1.5
Latch-up immunity
200
mA
1. All voltage values are measured with respect to the ground pin.
2. Differential voltage is the non-inverting input terminal with respect to the inverting input terminal.
3. The magnitude of input and output voltage must never exceed VCC +0.3V.
4. Short-circuits can cause excessive heating. Destructive dissipation can result from short-circuits on all
amplifiers.
5. Human body model: A 100pF capacitor is charged to the specified voltage, then discharged through a
1.5kΩ resistor between two pins of the device. This is done for all couples of connected pin combinations
while the other pins are floating.
6. Machine model: A 200pF capacitor is charged to the specified voltage, then discharged directly between
two pins of the device with no external series resistor (internal resistor < 5Ω). This is done for all couples of
connected pin combinations while the other pins are floating.
7. Charged device model: all pins and the package are charged together to the specified voltage and then
discharged directly to the ground through only one pin. This is done for all pins.
2/22
Share Link: 