TS274 Ver la hoja de datos (PDF) - STMicroelectronics

Número de pieza

componentes Descripción

Fabricante

TS274

High performance CMOS quad operational amplifier

STMicroelectronics 

Absolute maximum ratings and operating conditions

TS274

1

Absolute maximum ratings and operating conditions

Table 2. Absolute maximum ratings (AMR)

Symbol

Parameter

VCC+

Vid

Vin

Io

Iin

Toper

Tstg

Rthja

Supply voltage (1)

Differential input voltage (2)

Input voltage (3)

Output current for VCC+ ≥ 15V

Input current

Operating free-air temperature range

Storage temperature range

Thermal resistance junction to ambient(4)

SO-14

TSSOP14

DIP14

TS274C/AC

TS274I/AI

Unit

18

V

±18

V

-0.3 to 18

V

±30

mA

±5

mA

0 to +70

-40 to +125

°C

-65 to +150

°C

103

°C/W

100

80

Rthjc

ESD

Thermal resistance junction to case

SO-14

TSSOP14

DIP14

HBM: human body model(5)

MM: machine model(6)

CDM: charged device model(7)

31

°C/W

32

33

500

V

100

V

800

V

1. All values, except differential voltage are with respect to network ground terminal.

2. Differential voltages are the non-inverting input terminal with respect to the inverting input terminal.

3. The magnitude of the input and the output voltages must never exceed the magnitude of the positive

supply voltage.

4. Short-circuits can cause excessive heating and destructive dissipation. Values are typical.

5. Human body model: A 100pF capacitor is charged to the specified voltage, then discharged through a

1.5kΩ resistor between two pins of the device. This is done for all couples of connected pin combinations

while the other pins are floating.

6. Machine model: A 200pF capacitor is charged to the specified voltage, then discharged directly between

two pins of the device with no external series resistor (internal resistor < 5Ω). This is done for all couples of

connected pin combinations while the other pins are floating.

7. Charged device model: all pins and the package are charged together to the specified voltage and then

discharged directly to the ground through only one pin. This is done for all pins.

Table 3. Operating conditions

Symbol

VCC+

Vicm

Toper

Parameter

Supply voltage

Common mode input voltage range

Operating free-air temperature range

TS274C

TS274I

Value

3 to 16

0 to VCC+ - 1.5

0 to 70

-40 to 125

Unit

V

V

°C

2/14

Share Link: