TS1937 Ver la hoja de datos (PDF) - TSC Corporation

Número de pieza

componentes Descripción

Fabricante

TS1937

Boost (Step-up) WLED Driver

TSC Corporation 

TS1937

Boost (Step-up) WLED Driver

Application Information (Continue)

2. Using a Filtered PWM Signal

The filtered PWM signal can be considered as an adjustable DC voltage. It can be used to replace the variable DC

voltage source in dimming control. The circuit is shown as follow:

Duty

Iout ( mA)

0%

20

20%

17.4

30%

15

40%

12.4

50%

10

60%

8

70%

6.4

80%

4.07

100%

0

PWM : 2V ; 1KHz ; Vin=3.6V

Dimming Control using a Filtered PWM Signal

LED Current Control

The LED current is controlled by the feedback resistor (R1). The feedback reference is 95mV. The LED current is

95mV/R1. In order to have accurate LED current, precision resistors are preferred (1% is recommended). The formula

and table 3 for R1 selection are shown below.

R1 = 95mV/ILED

ILED (mA)

5

10

12

15

20

R1(Ω)

19.1

9.53

7.87

6.34

4.75

6/8

Version: C07

Share Link: