TLE42794
Pin Configuration
3.5
Pin Assignment TLE42794E (PG-SSOP-14 exposed pad)
5$'-
QF
'
*1'
QF
QF
52
6,
,
QF
4
QF
QF
62
3LQ&RQILJB6623YVG
Figure 4 Pin Configuration (top view)
3.6
Pin Definitions and Functions TLE42794E (PG-SSOP-14 exposed pad)
Table 2
Pin
1
Symbol
RADJ
2, 5, 6 n.c.
3
D
4
GND
7
RO
8
SO
9, 10, 12 n.c.
11
Q
13
I
14
SI
Function
Reset Threshold Adjust
connect an external voltage divider to adjust reset threshold;
connect to GND for using internal threshold
not connected
Reset Delay Timing
connect a ceramic capacitor to GND for adjusting the reset delay time;
leave open if the reset function is not needed
Ground
connect all pins to PCB and heatsink area
Reset Output
open collector output; external pull-up resistor required, respecting values given in
Item 5.6.4;
leave open if the reset function is not needed
Sense Output
open collector output; external pull-up resistor required, respecting values given in
Item 5.8.6;
leave open if the sense comparator is not needed
not connected
Output
block to GND with a capacitor close to the IC terminals, respecting the values given
for its capacitance CQ and ESR in the table “Functional Range” on Page 9
Input
for compensating line influences, a capacitor to GND close to the IC terminals is
recommended
Sense Input
connect the voltage to be monitored;
connect to Q if the sense comparator is not needed
Data Sheet
7
Rev. 1.1, 2008-10-09