LG1600FXH2433 Ver la hoja de datos (PDF) - Agere -> LSI Corporation

Número de pieza

componentes Descripción

Fabricante

LG1600FXH2433

LG1600FXH Clock and Data Regenerator

Agere -> LSI Corporation 

LG1600FXH Clock and Data Regenerator

Data Sheet

August 1999

Absolute Maximum Ratings

Stresses in excess of the absolute maximum ratings can cause permanent or latent damage to the device. These

are absolute stress ratings only. Functional operation of the device is not implied at these or any other conditions in

excess of those given in the operational sections of the data sheet. Exposure to absolute maximum ratings for

extended periods can adversely affect device reliability.

Table 2. Absolute Maximum Ratings

Parameter

Supply Voltage Range (VSS)

Loss of Signal Bias Voltage (VDD)

Power Dissipation

Voltage (all pins)

Transient Voltage to ac Couple Pins (V±IN, REXT)

Storage Temperature Range

Operating Temperature Range

Min

Max

Unit

–7

0.5

V

—

7

V

—

2

W

VSS

0.5

V

—

±3

V

–40

125

°C

–40

100

°C

Recommended Operating Conditions

Table 3. Recommended Operating Conditions

Parameter

Case Temperature

Power Supply

Symbol

tCASE

VSS

Min

0

–4.7

Max Unit

70

°C

–5.7

V

Handling Precautions

Although protection circuitry has been designed into this device, proper precautions should be taken to avoid expo-

sure to electrostatic discharge (ESD) during handling and mounting. Lucent Technologies Microelectronics Group

employs a human-body model (HBM) for ESD-susceptibility testing and protection design evaluation. The HBM

(resistance = 1500 Ω, capacitance = 100 pF) is used. The HBM ESD threshold presented in Table 4 was obtained

by using these circuit parameters.

Table 4. ESD Threshold

HBM ESD Threshold

Device

Voltage

LG1600FXH

≥200 V

Mounting and Connections

Certain precautions must be taken when using solder. For installation using a constant temperature solder, temper-

atures of under 300 °C may be employed for periods of time up to 5 seconds, maximum. For installation with a sol-

dering iron (battery operated or nonswitching only), the soldering tip temperature should not be greater than

300 °C and the soldering time for each lead must not exceed 5 seconds.

8

Lucent Technologies Inc.

Share Link: