TJA1083 Ver la hoja de datos (PDF) - NXP Semiconductors.

Número de pieza

componentes Descripción

Fabricante

TJA1083

FlexRay node transceiver

NXP Semiconductors. 

NXP Semiconductors

TXD

BGE

TXEN

BP

BM

TJA1083

FlexRay node transceiver

RXD

Fig 3. Timing diagram for Normal mode

015aaa002

Table 4 describes the behavior of the transmitter in Normal mode, when the temperature

flag (TEMP HIGH) is not set and with no time-out on pin TXEN. Transmitter behavior is

illustrated in Figure 13.

Table 4. Transmitter operation in Normal mode

BGE TXEN TXD Bus state Transmitter

L

X

X

idle

transmitter is disabled

X

H

X

idle

transmitter is disabled

H

L

H

DATA_1

transmitter is enabled; the bus lines are actively driven;

BP is driven HIGH and BM is driven LOW

H

L

L

DATA_0

transmitter is enabled; the bus lines are actively driven;

BP is driven LOW and BM is driven HIGH

The transmitter is activated during the first LOW level on pin TXD while pin BGE is HIGH

and pin TXEN is LOW.

In Normal mode, the normal receiver output is connected directly to pin RXD (see

Table 5). Receiver behavior is illustrated in Figure 14.

Table 5. Behavior of normal receiver in Normal mode

Bus state

RXD

DATA_0

L

DATA_1

H

idle

H

When VIO and VCC are within their operating ranges, pin ERRN indicates the status of the

error flag. See Section 6.8 for a detailed description of error signaling in Normal mode.

TJA1083

Product data sheet

All information provided in this document is subject to legal disclaimers.

Rev. 1 — 10 October 2012

© NXP B.V. 2012. All rights reserved.

6 of 41

Share Link: