TC1220 Ver la hoja de datos (PDF) - Microchip Technology

Número de pieza

componentes Descripción

Fabricante

TC1220

Switched Capacitor Voltage Converters with Shutdown in SOT Packages

Microchip Technology 

TC1219/TC1220

4.9 Voltage Doubler/Inverter

Another common application of the TC1219/TC1220 is

shown in Figure 4-6. This circuit performs two functions

in combination. C1 and C2 form the standard inverter

circuit described previously. C3 and C4 plus the two

diodes form the voltage doubler circuit. C1 and C3 are

the pump capacitors and C2 and C4 are the reservoir

capacitors. Because both sub-circuits rely on the same

switches if either output is loaded, both will droop

toward GND. Make sure that the total current drawn

from both the outputs does not total more than 40mA.

4.10 Diode Protection for Heavy Loads

When heavy loads require the OUT pin to sink large

currents being delivered by a positive source, diode

protection may be needed. The OUT pin should not be

allowed to be pulled above ground. This is

accomplished by connecting a Schottky diode

(1N5817) as shown in Figure 4-7.

4.11 Layout Considerations

As with any switching power supply circuit good layout

practice is recommended. Mount components as close

together as possible to minimize stray inductance and

capacitance. Noise leakage into other circuitry can be

minimized with the use of a large ground plane.

FIGURE 4-6:

COMBINED DOUBLER AND INVERTER

VIN

3

2

C1

+

4

TC1219

TC1220

D1, D2 = 1N4148

D1

6

1

5

Shutdown

Control

+

C3

C2

+

D2

+

C4

VOUT = -VIN

VOUT = (2VIN) –

(VFD1) – (VFD2)

FIGURE 4-7:

HIGH V– LOAD CURRENT

4

GND

TC1219

TC1220

1

OUT

DS21366B-page 8

 2002 Microchip Technology Inc.

Share Link: