TC1220 Ver la hoja de datos (PDF) - Microchip Technology
Número de pieza
componentes Descripción
Fabricante
TC1220 Datasheet PDF : 16 Pages
| |||
M TC1219/TC1220
Switched Capacitor Voltage Converters with Shutdown in SOT Packages
Features
• Charge Pumps in 6-Pin SOT-23A Package
• >95% Voltage Conversion Efficiency
• Voltage Inversion and/or Doubling
• Operates from +2.5V to +5.5V
• Up to 25mA Output Current
• Only Two External Capacitors Required
• Low Power Consumption
• Power-Saving Shutdown Mode
• TC1220 Compatible with 1.8V Logic Systems
Applications
• LCD Panel Bias
• Cellular Phones
• Pagers
• PDAs, Portable Dataloggers
• Battery-Powered Devices
Device Selection Table
Part
Number
Package
Osc.
Freq.
(kHz)
Operating
Temp.
Range
TC1219ECH 6-Pin SOT-23A 12 -40°C to +85°C
TC1220ECH 6-Pin SOT-23A 35 -40°C to +85°C
Package Type
6-Pin SOT-23A
C+ SHDN GND
6
5
4
TC1219ECH
TC1220ECH
1
2
3
OUT VIN
C–
NOTE: 6-Pin SOT-23A is equivalent to the EIAJ SC-74
General Description
The TC1219/TC1220 are CMOS “charge-pump”
voltage converters in ultra-small 6-Pin SOT-23A
packages. They invert and/or double an input voltage
which can range from +2.5V to +5.5V. Conversion
efficiency is typically >95%. Switching frequency is
12kHz for the TC1219, 35kHz for the TC1220. When
the shutdown pin is held at a logic low, the device goes
into a very low power mode of operation, consuming
less than 1µA of supply current.
External component requirement is only two capacitors
for standard voltage inverter applications. With a few
additional components a positive doubler can also be
built. All other circuitry, including control, oscillator,
power MOSFETs are integrated on-chip. Typical supply
currents are 60µA (TC1219), 115µA (TC1220).
All devices are available in 6-pin SOT-23A surface
mount packages.
Functional Block Diagram
Negative Voltage Inverter
C+
VIN
+
C1
TC1219
TC1220
C–
Input
ON
SHDN
OFF
GND
OUT
C2
+
V–
Output
2002 Microchip Technology Inc.
DS21366B-page 1
Share Link: 