(2) When stopping the motor using reversing brake mode
MS: L, BRK: L
VC
Vref
TA8493F/AF/BF
Forward mode
Reversing
Brake mode
Stopped
Note3: For an explanation of the Reversing Brake mode stopping sequence, refer to the explanation of the
reverse rotation detection circuit.
The short brake generates less heat than the reversing brake. Therefore Toshiba recommends a
combined use of the short and reversing brakes when stopping the motor.
• Run/stop control circuit
SB
When the driver IC is standing by, all of its circuits except the FG amp and the hall amp are turned off.
H: start
L: standby
• Hall amp circuit
Ha+
Ha−
The common mode input voltage range for VCMRH is 1.5 to 4.0 V.
10
2003-10-07