TA8221 Ver la hoja de datos (PDF) - Toshiba

Número de pieza

componentes Descripción

Fabricante

TA8221

30W BTL x 2CH AUDIO POWER AMPLIFIER

Toshiba 

TA8221AHQ / ALQ

3. Preventive measure against oscillation

For preventing the oscillation, it is advisable to use C4, the condenser of polyester film having small

characteristic fluctuation of the temperature and the frequency.

The condenser (C6) between input and GND is effective for preventng oscillation which is generated with a

feedback signal from an output stage.

The resistance R to be series applied to C4 is effective for phase correction of high frequency, and improves the

oscillation allowance.

(1) Voltage gain to be used (GV setting)

(2) Capacity value of condenser

(3) Kind of condenser

(4) Layout of printed board

In case of its use with the voltage gain GV reduced or with the feedback amount increased, care must be taken

because the phase−inversion is caused by the high frequency resulting in making the oscillation liable generated.

4. Adjustment of output offset (when the power supply turn on)

As this IC is contructed with DC circuit on the primary stage, it is necessary to lower a input offset or output

offset by agreement with the each leading edge time constant of the input voltage in the primary stage and NF

terminal voltage.

Concretely, monitor the output DC voltage and vary the capacity value in input condenser and NF condenser (see

Fig.4)

(reference) In case of setting the condition (GV = 40dB) with Rf = 470Ω.

4

2006-04-28

Share Link: