TA8805F(2001) Ver la hoja de datos (PDF) - Toshiba
Número de pieza
componentes Descripción
Fabricante
TA8805F Datasheet PDF : 17 Pages
| |||
TA8805F,TA1207F
TEST CONDITION
<PIF circuit>
Note 1: Output signal voltage
PIF input : fo = 58.75 MHz, 87.5%AM, 84 dBµV, standard TV signal (V / S = 10 : 4 Ramp)
Measure output video signal voltage.
Note 2: PIF input signal voltage sensitivity
PIF input : fo = 58.75 MHz, fm = 15.75 kHz, 30%AM, 84 dBµV
Measure output video signal voltage (that voltage is 0 dB). Lower input signal voltage gradually,
measure input PIF signal voltage when output video signal voltage is −3 dB.
Note 3: Maximum input signal voltage
PIF input : fo = 58.75 MHz, fm = 15.75 kHz, 30%AM, 84 dBµV
Measure output video signal voltage (that voltage is 0 dB). Raise input signal voltage gradually,
measure input PIF signal voltage when output video signal voltage is +3 dB
Note 4: −3 dB video band width
(1) PIF input :
fo = 58.75 MHz, 84 dBµV, CW
Measure IF AGC voltage and supply that voltage from external source.
(2) Input following composite signals to the PIF input :
SG : 1 58.75 MHz, 84 dBµV (frequency : fixed)
SG : 2 58.65~45 MHz, 64 dBµV (frequency : variable)
Monitor spectrum of output signal at pin 24. Change frequency of SG : 2, measure frequency of
SG : 2, when video output signal is −3 dB.
Difference between that frequency and 58.75 MHz is −3 dB band width.
Note 5: Dependence of output signal voltage on power supply voltage
PIF input : fo = 58.75 MHz, 87.5%AM, 84 dBµV, standard TV signal (V / S = 10 : 4 Ramp)
Measure the output video signal voltage when power supply voltage are 3.5 V and 5.5 V. (4.5 ± 1.0 V)
Compare those voltage and the output video signal voltage when power supply voltage is 4.5 V.
Note 6: Deferential gain / Deferential phase
PIF input : fo = 58.75 MHz, 87.5%AM, 84 dBµV, standard TV signal (V / S = 10 : 4 Ramp) IF AGC :
free
Measure deferential gain and deferential phase.
2001-02-26 9/17
Share Link: 