TA0104A Ver la hoja de datos (PDF) - Tripath Technology Inc.
Número de pieza
componentes Descripción
Fabricante
TA0104A
Tripath Technology Inc.
TA0104A Datasheet PDF : 18 Pages
| |||
Tripath Technology, Inc. - Technical Information
TA 0 1 0 4 A
STEREO 500W (4Ω) CLASS-T DIGITAL AUDIO AMPLIFIER
DRIVER USING DIGITAL POWER PROCESSING (DPPTM)
TECHNOLOGY
Technical Information
Revision 3.1 – June 2000
GENERAL DESCRIPTION
The TA0104A is a 500W continuous average (4Ω), two channel Amplifier Driver
Module which uses Tripath’s proprietary Digital Power Processing (DPPTM)
technology. Class-T amplifiers offer both the audio fidelity of Class-AB and the
power efficiency of Class-D amplifiers.
APPLICATIONS
Audio/Video
Amplifiers/Receivers
Pro-audio Amplifiers
Automobile Power Amplifiers
Subwoofer Amplifiers
BENEFITS
Reduced system cost with smaller/less
expensive power supply and heat sink
Signal fidelity equal to high quality Class-AB
amplifiers
High dynamic range compatible with digital
media such as CD and DVD
Features
Class-T architecture
Proprietary Digital Power Processing
technology
Supports wide range of output power levels
“Audiophile” Sound Quality
0.02% THD+N @ 300W, 8Ω
0.02% IHF-IM @ 100W, 8Ω
350W @ 8Ω, 0.1% THD+N, Vs = +90V
500W @ 4Ω, 0.1% THD+N, Vs = +90V
High Power
450W @ 8Ω, 1% THD+N, Vs = +90V
750W @ 4Ω, 1% THD+N, Vs = +90V
High Efficiency
90% @ 400W @ 8Ω, Vs = +75V
85% @ 600W @ 4Ω, Vs = +75V
Dynamic Range = 106 dB
Requires only N-Channel MOSFET output transistors
High power supply rejection ratio
Mute input
Outputs short-circuit protected
Over- and under-voltage protection
Bridgeable, single-ended outputs
38-pin quad package
Supports 100kHz BW of Super Audio CD and DVD-
Audio (Refer to Application Note for specifics)
TYPICAL PERFORMANCE AT +90V
THD+N vs Output Power
10
5 20Hz - 22kHz BW
f = 1kHz
2 BBM = 25nS
1 VS = +/-90V
0.5 Av = 200
ST STW38NB20 MOSFET
0.2
0.1
0.05
RL = 4Ω
0.02
0.01
0.005
0.002
0.001
RL = 8Ω
1
2
5
10
20
50
100
200
Output Power (W)
500
1K
1
TA104A – Rev. 3.1/06.00
Share Link: