W91030 Ver la hoja de datos (PDF) - Winbond

Número de pieza

componentes Descripción

Fabricante

W91030

CALLING LINE IDENTIFIER

Winbond 

Preliminary W91030B

GENERAL DESCRIPTION

The Winbond Caller Identification device W91030B, is a low power CMOS integrated circuit used to

receive physical layer signals transmitted according to Bellcore and British Telecom (BT)

specifications. There are two types of Caller Identifications, the first type is on-hook calling with caller

ID message and the second type is call on waiting. The W91030B device provides all the features

and functions of the Caller Identification specification for both these types, including FSK

demodulation, Tone Alert Signal detection and ring detection. The FSK demodulation function can

demodulate Bell 202 and CCITT V.23 Frequency Shift Keying (FSK) with 1200 baud rate. The Tone

Alert Signal detect function can detect the dual tones of the Bellcore CPE* Tone Alerting Signal

(CAS) and the BT idle State and Loop State Tone Alert Signal. The line reversal for BT, ring burst for

CCA or ring signal for Bellcore can be detected by the ring detector.

There are two modes of FSK data output interface. The first mode is a data transfer activated by the

device, whose clock and data change depending upon the changing frequency of the FSK analog

signal input. The second mode allows a microcontroller to extract 8-bit data from the device serially;

the device notifies the micro-controller when 8-bit data has been received.

Note: "CPE*" Customer Primises Equipment

FEATURES

• Compatible with Bellcore TR-NWT-000030 & SR-TSV-002476, British Telecom (BT) SIN227, U.K.

Cable Communications Association (CCA) specification

• Ring and line reversal detection

• Bellcore CPE Alerting Signal (CAS) and BT idle State and Loop State Tone Alerting Signal

detection use dual tone alerting signal detector

• BELL 202 and CCITT V.23 FSK demodulation with 1200 baud rate

• Use 3.579545 MHz crystal or ceramic resonator

• Low power CMOS technology with sleep mode

• High input sensitivity

• Variable gain input amplifier

• FSK carry detect output

• Two modes for 3-wire FSK data interface

• Packaged in 24-pin 0.6 inch (600 mil) plastic DIP (W91030B) and 24-pin 0.3 inch (300 mil) plastic

SOP (W91030BS).

Applications

• Bellcore Calling Identity Delivery (CID), and BT Calling Line Identity Presentation (CLIP), CCA CLIP

systems

• Feature phones

• Phone set adjunct boxes

• FAX and answering machines

• Data base telephone system and Computer Telephony Integration (CTI) systems

-2-

Share Link: