SSD1852Z Ver la hoja de datos (PDF) - Solomon Systech

Número de pieza

componentes Descripción

Fabricante

SSD1852Z

LCD Segment / Common Driver With Controller

Solomon Systech  

7.14 LCD Panel Driving Waveform ................................................................................................ 16

8 COMMAND TABLE.......................................................................................................................... 19

9 COMMAND DESCRIPTIONS .......................................................................................................... 25

9.1 Set Lower Column Address ................................................................................................... 25

9.2 Set Upper Column Address ................................................................................................... 25

9.3 Set Internal Regulator Resistor Ratio ................................................................................... 25

9.4 Set Power Control Register ................................................................................................... 25

9.5 Set Display Start Line ............................................................................................................. 25

9.6 Set Display Offset ................................................................................................................... 25

9.7 Set Multiplex Ratio .................................................................................................................. 25

9.8 Set N-line Inversion ................................................................................................................ 25

9.9 Set LCD Bias............................................................................................................................ 25

9.10 Set DC-DC Converter Factor.................................................................................................. 26

9.11 Set Contrast Control Register ............................................................................................... 26

9.12 Set Gray Scale Mode (White/Light Gray/Dark Gray/Black) ................................................. 26

9.13 Set PWM and FRC ................................................................................................................... 27

9.14 Set Segment Re-map .............................................................................................................. 27

9.15 Set Icon Enable ....................................................................................................................... 27

9.16 Set Entire Display On/Off ....................................................................................................... 27

9.17 Set Normal/Inverse Display.................................................................................................... 27

9.18 Set Power Save Mode............................................................................................................. 27

9.19 Start Internal Oscillator .......................................................................................................... 27

9.20 Set Display On/Off .................................................................................................................. 27

9.21 Set Page Address ................................................................................................................... 27

9.22 Set COM Output Scan Direction ............................................................................................ 27

9.23 Set Modify-Read ...................................................................................................................... 27

9.24 Exit Power-save Mode ............................................................................................................ 28

viii

Share Link: