SPX1582T5-2.5 Ver la hoja de datos (PDF) - Signal Processing Technologies

Número de pieza

componentes Descripción

Fabricante

SPX1582T5-2.5

3A Ultra Low Dropout Voltage Regulator (Fast Response, Adjustable & Fixed)

Signal Processing Technologies 

Adjustable Regulator Design

1.25V reference voltage is being developed be-

tween the SENSE pin and the ADJ pin of the

SPX1582. Adding two external resistors (see fig

1.) will allow setting the output voltage from

1.25V to 6V. R1 is chosen so that this current is

specified minimum load current of 10mA. R2 is

given by the formula: VOUT = VREF (1+ R2/R1)

+ IADJ (R2). The current flowing from the ADJ

pin is typicaly 50µA. This ADJ pin contributes

to the final VOUT but is usually neglected.

Connecting the sense pin to the top of the resis-

tor divider will improve load regualtion.

Lowering Noise

Using the SENSE pin to Kelvin the load will

increase accuracy of the output voltage during

load regulation. For the fixed voltage device,

adding a capacitor at the GND pin will improve

transient response. THis capacitor is chosen in

the range of 1µF to 0.1µF and will depend on the

amount of output capacitance in the system.

APPLICATION NOTES: Continued

Date:5/25/04

SPX1582 3A Ultra Low Dropout Voltage Regulator

4

©Copyright 2004 Sipex Corporation

Share Link: