+5V BIAS SUPPLY APPLICATION SCHEMATIC
In this application example, the SP6132CU is power by an external +5V bias supply
which current consumption of 20mA Maximum. If this supply is not available than it
is recommend Sipex SPX5205 Low-Noise LDO Voltage Regulator which is included
on the 6132CU Evaluation Board.
Vout ripple = 30mV
Ichoke(5A/div)
GH & GL
Vout ripple = 60mV
Ichoke(5A/div)
GH & GL
Figure 9. Output Ripple: No Load
Figure 10. Output Ripple: 10A Load
4