SMT15C Ver la hoja de datos (PDF) - Artesyn Technologies
Número de pieza
componentes Descripción
Fabricante
SMT15C Datasheet PDF : 3 Pages
| |||
SMT15C Series
5 Vin and 12 Vin single output
DC-DC CONVERTERS C Class Non-isolated
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
2
NEW Product
OUTPUT
POWER
(MAX.)
50 W
75 W
INPUT
VOLTAGE
4.5-5.5 Vdc
10.2-13.8 Vdc
OUTPUT
VOLTAGE
0.9-3.3 Vdc
0.9-5.0 Vdc
OUTPUT
CURRENT
(MIN.)
0A
0A
OUTPUT
CURRENT
(MAX.)
15 A
15 A
EFFICIENCY
(TYP.)
89%
91%
Part Number System with Options
SMT15C-12SADJJ
REGULATION
LINE
LOAD
±0.2%
±0.2%
±0.5%
±0.5%
MODEL
NUMBER (12,13)
SMT15C-05SADJJ
SMT15C-12SADJJ
Product Family
SMT = Surface Mount
Rated Output Current
15 = 15 A
Performance
C = Cost Optimized
Packaging Options (12)
J = Pb-free (RoHS 6/6 compliant)
Number of Outputs
SADJ = Single Adjustable Output
Input Voltage
05 = 4.5 Vdc to 5.5 Vdc
12 = 10.2 Vdc to 13.8 Vdc
Output Voltage Adjustment of the SMT15C Series
The ultra-wide output voltage trim range offers major advantages to users who
select the SMT15C series. It is no longer necessary to purchase a variety of
modules in order to cover different output voltages. The output voltage can be
trimmed in a range of 0.9 Vdc to 5.0 Vdc. When the SMT15C series converter
leaves the factory the output has been adjusted to the default voltage of 0.9 V.
Notes
1 di/dt = 10 A/µs, Vin = Nom, Tc = 25 ºC, load change = 0.50 lo max. to
0.75 lo max, and vice versa.
2 Measured with external filter. See Application Note 169 for details.
3 Power up is the time from application of dc input to POWER GOOD high.
Remote ON/OFF asserted high to POWER GOOD high.
4 This product is only for inclusion by professional installers within other
equipment and must not be operated as a stand alone product.
5 Reserved.
6 Measured as per recommended set-up. Cin = 270 µF (20mΩ ESR max.),
Cout = 680 µF (10 mΩ ESR max.).
7 Uses external resistor from TRIM to ground. See Application Note 169
for details. Minimum value 485 µF for 5 V model, 280 µF for 12 V model.
8 Signal line assumed <3 m in length.
9 External input fusing recommended.
10 See Application Note 169 for operation above 50 ºC.
11 See Application Note 169 for more details.
12 TSE RoHS 5/6 (non Pb-free) compliant versions may be available on
special request, please contact your local sales representative for details.
13 NOTICE: Some models do not support all options. Please contact your
local Artesyn representative or use the on-line model number search tool
at http://www.artesyn.com/powergroup/products.htm to find a suitable
alternative.
International Safety Standard Approvals
UL/cUL CAN/CSA 22.2 No. 60950
UL 60950 File No. E139421
TÜV Product Service (EN60950:2000)
Certificate No. B 04 08 19870 228
CB report and certificate to US/6415C/UL
Ripple and Noise Specification
Model
Output
Voltage
5 V input models 0.9 Vdc to 2.5 Vdc
3.3 Vdc
12 V input models 0.9 Vdc to 2.5 Vdc
3.3 Vdc to 5 Vdc
Pk - Pk
30 mV
40 mV
50 mV
50 mV
RMS
15 mV
15 mV
25 mV
25 mV
File Name: smt15c.pdf Rev Rev (03): 16 Dec 2005
Share Link: 