SMT06C(2005) Ver la hoja de datos (PDF) - Artesyn Technologies
Número de pieza
componentes Descripción
Fabricante
SMT06C Datasheet PDF : 3 Pages
| |||
SMT06C Series
5 Vin and 12 Vin single output
DC-DC CONVERTERS C Class Non-isolated
For the most current data and application support visit www.artesyn.com/powergroup/products.htm
2
NEW Product
OUTPUT
POWER
(MAX.)
20 W
30 W
INPUT
VOLTAGE
4.5-5.5 Vdc
10.2-13.8 Vdc
OUTPUT
VOLTAGE
0.9-3.3 Vdc
0.9-5.0 Vdc
OUTPUT
CURRENT
(MIN.)
0A
0A
OUTPUT
CURRENT
(MAX.)
6A
6A
EFFICIENCY
(TYP.)
89%
91%
REGULATION
LINE
LOAD
±0.2%
±0.2%
±0.5%
±0.5%
MODEL
NUMBER (11,12)
SMT06C-05SADJJ
SMT06C-12SADJJ
Part Number System with Options
SMT06C-12SADJJ
Product Family
SMT = Surface Mount
Rated Output Current
06 = 6 A
Performance
C = Cost Optimized
Packaging Options (11)
J = Pb-free (RoHS 6/6 compliant)
Number of Outputs
SADJ = Single Adjustable Output
Input Voltage
05 = 4.5 Vdc to 5.5 Vdc
12 = 10.2 Vdc to 13.8 Vdc
Output Voltage Adjustment of the SMT06C Series
The ultra-wide output voltage trim range offers major advantages to users who
select the SMT06C series. It is no longer necessary to purchase a variety of
modules in order to cover different output voltages. The output voltage can be
trimmed in a range of 0.9 Vdc to 5.0 Vdc. When the SMT06C series converter
leaves the factory the output has been adjusted to the default voltage of 0.9 V.
Notes
1 di/dt = 10 A/µs, Vin = Nom, Tc = 25 °C, load change = 0.50 lo max. to
0.75 lo max. and 0.75 lo max. to 0.5 lo max.
2 Measured with external filter. See Application Note 169 for details.
3 Power up is the time from application of dc input to Power Good high.
Remote ON/OFF asserted high to Power Good high.
4 This product is only for inclusion by professional installers within other
equipment and must not be operated as a stand alone product.
5 Measured as per recommended set-up. Cin = 270 µF (20 mΩ ESR
max.). Cout = 680 µF (10 mΩ ESR max.).
6 Uses external resistor from trim to ground. Minimum value 485 Ω for 5 V
model, 280 Ω for 12 V model. See Application Note 169 for details.
7 Signal line assumed <3 m.
8 External input fusing recommended.
9 See Application Note 169 for operation above 50 ºC.
10 See Application Note 169 for more details.
11 TSE RoHS 5/6 (non Pb-free) compliant versions may be available on
special request, please contact your local sales representative for details.
12 NOTICE: Some models do not support all options. Please contact your
local Artesyn representative or use the on-line model number search tool
at http://www.artesyn.com/powergroup/products.htm to find a suitable
alternative.
International Safety Standard Approvals
UL/cUL CAN/CSA 22.2 No. 60950
UL 60950 File No. E139421
TÜV Product Service (EN60950:2000)
Certificate No. B 04 08 19870 228
CB report and certificate to US/6415C/UL
Ripple and Noise Specification
Model
Output
Voltage
5 V input models 0.9 Vdc to 2.5 Vdc
3.3 Vdc
12 V input models 0.9 Vdc to 2.5 Vdc
3.3 Vdc to 5 Vdc
Pk - Pk
30 mV
40 mV
40 mV
50 mV
RMS
15 mV
15 mV
20 mV
20 mV
File Name: smt06c.pdf Rev (03): 15 Dec 2005
Share Link: 