SM7511 Ver la hoja de datos (PDF) - Samhop Mircroelectronics
Número de pieza
componentes Descripción
Fabricante
SM7511 Datasheet PDF : 23 Pages
| |||
SAMHOP Microelectronics Corp.
3W STEREO AUDIO POWER AMPLIFIER WITH ADVANCED DC VOLUME CONTROL
PIN DESCRIPTIONS
No.
Pin Name
1.13
PGND
2
ROUT-
3.11
PVDD
4
RHPIN
5
RLINEIN
6
RIN
7
VDD
8
LIN
9
LLINEIN
10
LHPIN
12
LOUT-
14
LOUT+
15
SHUTDOWN
16
FADE
17
BYPASS
18
AGND
19
SEMAX
20
SEDIFF
21
VOLUME
22
HP/LINE
23
SE/BTL
24
ROUT+
I/O
-
Power ground
Function
O Right channel negative audio output
-
Supply voltage terminal for power stage
I
Right channel headphone input,selected when HP/LINE is held high
I
Right channel line input, selected when HP/LINE is held low
Common right channel input for fully defferential input. AC ground for
I
single-ended inputs.
-
Supply voltage terminal
I
Common left channel input for fully differential input. AC ground for
single-ended inputs.
I
Left channel line input, selected when HP/LINE is held low
I
Left channel headphone input,selected when HP/LINE is held high.
O Left channel negative audio output
O Left channel positive audio output.
I
Places the amplifier in shutdown mode if a TTL logic low is placed on
this terminal.
I
Places the amplifier in fade mode if a logic low is placed on this
termnal; normal operation if a logic high is placed on this terminal.
I
Tap to voltage divider for internal midsupply bias generator used for
analog reference.
-
Analog power supply ground
Sets the maximum volume for single ended operation.DC voltage
I
range is 0 to VDD
Sets the difference between BTL volume and SE volme. DC voltage
I
range is 0 to VDD
I
Terminal for dc volume control. DC voltage range is 0 to VDD
Input MUX control. When logic high,RHPIN and LHPIN inputs are
I
selected. When logic low,RLINEIN and LLINEIN inputs are selected
I
Output MUX control. When this terminal is high,SE outputs are
selected.When this terminal is low, BTL outputs are selected
O Right channel positive audio output.
Page 2
V.1.3 Revised April 02,2007
Share Link: 